From a4f9ea11f35ad85e64d1be045c751217024ad5e5 Mon Sep 17 00:00:00 2001
From: Roy <roy@linuxcore.nl>
Date: Mon, 23 Jun 2025 21:19:51 +0200
Subject: [PATCH] first commit

---
 IptablesTool.sh~                              | 248 ++++++
 Man_tool/change_pass.sh                       |  19 +
 Man_tool/command_loop.sh                      |  31 +
 Man_tool/uptime_loop.sh                       |  16 +
 Man_tool/ww                                   |   1 +
 OpenShift Stuff/collect_info.sh               |  12 +
 OpenShift Stuff/run_collect_info.sh           |  50 ++
 OpenShift Stuff/yum_update_tool_openshift.sh  | 193 +++++
 README.md                                     |   0
 WsConfman/confman/hostlist/192.168.2.100      |   2 +
 WsConfman/confman/hostlist/192.168.2.163      |   2 +
 WsConfman/confman/managemnt.sh                |  60 ++
 WsConfman/confman/scripts/first_start.sh      |   9 +
 WsConfman/ks.cfg                              | 164 ++++
 post_install.sh                               | 380 +++++++++
 scripts/IptablesCleanTool.sh                  |  57 ++
 scripts/IptablesTool.sh                       | 745 ++++++++++++++++++
 scripts/IptablesTool2.sh                      | 743 +++++++++++++++++
 scripts/Loop_AddUser3.sh                      |  17 +
 scripts/adduser_schrpt.sh                     |  54 ++
 scripts/bashrc                                |  97 +++
 scripts/bashrc.hv                             |  54 ++
 scripts/command_loop.sh                       |  17 +
 scripts/count_ip.sh                           |  12 +
 scripts/git_prompt_func                       |  55 ++
 scripts/gluster_check.sh                      |  92 +++
 .../gluster_checks/check_gluster_bricks.sh    |  23 +
 scripts/gluster_checks/check_gluster_cron.sh  |  24 +
 scripts/gluster_checks/check_gluster_heal.sh  |  25 +
 scripts/gluster_checks/check_gluster_peer.sh  |  23 +
 scripts/gluster_checks/check_gluster_pod.sh   |  15 +
 scripts/gluster_checks/check_glusterd.sh      |  41 +
 .../copy_gluster_check_to_pod.sh              |  12 +
 .../pod_loop_gluster_heal_status.sh           |  20 +
 .../some_check_gluster_openshift.sh           |  58 ++
 scripts/host_ssh_test.sh                      |  19 +
 scripts/iptables1.sh                          |  61 ++
 scripts/iptables2.sh                          |  28 +
 scripts/iptables_Roy.sh                       | 209 +++++
 scripts/loop_a_function.sh                    |  17 +
 scripts/looping_within_host_ssh.sh            |  10 +
 scripts/motd                                  |  62 ++
 scripts/mount_tool.sh                         | 181 +++++
 scripts/ping_test.sh                          |  13 +
 scripts/sc.sh                                 |  11 +
 scripts/some_thouts.sh                        |  70 ++
 scripts/ssh_loop.sh                           |  28 +
 scripts/test_con_server_status.sh             |  15 +
 scripts/test_scripts/gluster_peer_check.sh    |   8 +
 scripts/test_scripts/log_oc_nodes.sh          |   6 +
 scripts/test_scripts/log_oc_pods.sh           |   6 +
 scripts/test_scripts/log_ping_between.sh      |  14 +
 scripts/test_scripts/ping_test.sh             |  18 +
 scripts/test_scripts/test_all.sh              |  33 +
 scripts/test_scripts/uptime_hv.sh             |  18 +
 scripts/test_scripts/uptime_vm.sh             |  17 +
 scripts/test_scripts/virsh_list_hv.sh         |  19 +
 scripts/tools/OS_patching_tool.sh             | 194 +++++
 scripts/tools/collect_info.sh                 |  13 +
 scripts/tools/drain_host.sh                   |  14 +
 scripts/tools/just_a_waiting_bar.sh           |  32 +
 scripts/tools/run_collect_info_v2.sh          |  54 ++
 scripts/tools/uncordon_host.sh                |  14 +
 scripts/uptime_loop.sh                        |  16 +
 shell.sh                                      |  94 +++
 shell_history_audit.sh                        | 110 +++
 ssh_loops/loop_array.sh                       |  13 +
 ssh_loops/loop_array_with_flags.sh            |  51 ++
 ssh_loops/service_check_loop.sh               |  18 +
 69 files changed, 4857 insertions(+)
 create mode 100644 IptablesTool.sh~
 create mode 100755 Man_tool/change_pass.sh
 create mode 100755 Man_tool/command_loop.sh
 create mode 100755 Man_tool/uptime_loop.sh
 create mode 100644 Man_tool/ww
 create mode 100644 OpenShift Stuff/collect_info.sh
 create mode 100644 OpenShift Stuff/run_collect_info.sh
 create mode 100644 OpenShift Stuff/yum_update_tool_openshift.sh
 create mode 100644 README.md
 create mode 100644 WsConfman/confman/hostlist/192.168.2.100
 create mode 100644 WsConfman/confman/hostlist/192.168.2.163
 create mode 100755 WsConfman/confman/managemnt.sh
 create mode 100755 WsConfman/confman/scripts/first_start.sh
 create mode 100644 WsConfman/ks.cfg
 create mode 100644 post_install.sh
 create mode 100644 scripts/IptablesCleanTool.sh
 create mode 100644 scripts/IptablesTool.sh
 create mode 100644 scripts/IptablesTool2.sh
 create mode 100644 scripts/Loop_AddUser3.sh
 create mode 100644 scripts/adduser_schrpt.sh
 create mode 100644 scripts/bashrc
 create mode 100644 scripts/bashrc.hv
 create mode 100644 scripts/command_loop.sh
 create mode 100644 scripts/count_ip.sh
 create mode 100644 scripts/git_prompt_func
 create mode 100644 scripts/gluster_check.sh
 create mode 100644 scripts/gluster_checks/check_gluster_bricks.sh
 create mode 100644 scripts/gluster_checks/check_gluster_cron.sh
 create mode 100644 scripts/gluster_checks/check_gluster_heal.sh
 create mode 100644 scripts/gluster_checks/check_gluster_peer.sh
 create mode 100644 scripts/gluster_checks/check_gluster_pod.sh
 create mode 100644 scripts/gluster_checks/check_glusterd.sh
 create mode 100644 scripts/gluster_checks/copy_gluster_check_to_pod.sh
 create mode 100644 scripts/gluster_checks/pod_loop_gluster_heal_status.sh
 create mode 100644 scripts/gluster_checks/some_check_gluster_openshift.sh
 create mode 100644 scripts/host_ssh_test.sh
 create mode 100644 scripts/iptables1.sh
 create mode 100644 scripts/iptables2.sh
 create mode 100644 scripts/iptables_Roy.sh
 create mode 100644 scripts/loop_a_function.sh
 create mode 100644 scripts/looping_within_host_ssh.sh
 create mode 100644 scripts/motd
 create mode 100644 scripts/mount_tool.sh
 create mode 100644 scripts/ping_test.sh
 create mode 100644 scripts/sc.sh
 create mode 100644 scripts/some_thouts.sh
 create mode 100644 scripts/ssh_loop.sh
 create mode 100644 scripts/test_con_server_status.sh
 create mode 100644 scripts/test_scripts/gluster_peer_check.sh
 create mode 100644 scripts/test_scripts/log_oc_nodes.sh
 create mode 100644 scripts/test_scripts/log_oc_pods.sh
 create mode 100644 scripts/test_scripts/log_ping_between.sh
 create mode 100644 scripts/test_scripts/ping_test.sh
 create mode 100644 scripts/test_scripts/test_all.sh
 create mode 100644 scripts/test_scripts/uptime_hv.sh
 create mode 100644 scripts/test_scripts/uptime_vm.sh
 create mode 100644 scripts/test_scripts/virsh_list_hv.sh
 create mode 100644 scripts/tools/OS_patching_tool.sh
 create mode 100644 scripts/tools/collect_info.sh
 create mode 100644 scripts/tools/drain_host.sh
 create mode 100644 scripts/tools/just_a_waiting_bar.sh
 create mode 100644 scripts/tools/run_collect_info_v2.sh
 create mode 100644 scripts/tools/uncordon_host.sh
 create mode 100644 scripts/uptime_loop.sh
 create mode 100644 shell.sh
 create mode 100644 shell_history_audit.sh
 create mode 100644 ssh_loops/loop_array.sh
 create mode 100644 ssh_loops/loop_array_with_flags.sh
 create mode 100644 ssh_loops/service_check_loop.sh

diff --git a/IptablesTool.sh~ b/IptablesTool.sh~
new file mode 100644
index 0000000..fc35cda
--- /dev/null
+++ b/IptablesTool.sh~
@@ -0,0 +1,248 @@
+#!/bin/bash
+#(c) Roy Cohen 2012		:roy.cohen@cgi.com
+#CGI 					:George Hintzenweg 89  3068 AX Rotterdam, Netherlands 088 5640000
+#objective				:IPtables administarion tool
+#last update			:23/11/2012
+#version				:0.1
+
+
+# Parameters
+IPT=/sbin/iptables
+
+
+echo -e "					Welcome"
+###############################IPTABLE SERVICES PROGRAM BEGINS HERE###############################
+checkstatus()
+ {
+  opt_checkstatus=1
+ while [ $opt_checkstatus != 7 ]
+      do
+       clear
+  #echo -e "\nChoose the Option Bellow!!!\n
+  echo -e "\n\t*****Note: Save your Iptables before stop/Restart the iptables Services*****\n"
+  echo -e "   1. Save the iptables\n
+   2. Status of Iptables\n
+   3. Start iptables Services\n
+   4. Stop iptables Services\n
+   5. Restart iptable Services\n
+   6. Flush iptables (**Use Carefully_it will remove all the rules from iptables**)\n
+   7. Go back to Main Menu"
+  read opt_checkstatus
+  case $opt_checkstatus in
+   1) echo -e "*******************************************************\n" 
+               /etc/init.d/iptables save 
+      echo -e "\n*******************************************************\n"
+    echo -e "Press Enter key to Continue..."
+    read temp;;
+   2) echo -e "*******************************************************\n"
+               /etc/init.d/iptables status 
+      echo -e "*******************************************************"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   3) echo -e "*******************************************************\n"  
+               /etc/init.d/iptables start 
+      echo -e "*******************************************************\n"
+                                 echo -e "Press Enter key to Continue..."
+                                       read temp;;
+   
+   4) echo -e "*******************************************************\n"
+               /etc/init.d/iptables stop
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+     
+             5) echo -e "*******************************************************\n"
+                      /etc/init.d/iptables restart 
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   6) iptables -F 
+   echo -e "*******************************************************"
+   echo -e "All the Rules from the Iptables are Flushed!!!"
+   echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                 read temp;;
+   7) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+ }
+###############################BUILD FIREWALL PROGRAM BEGINS FROM HERE############################### 
+buildfirewall()
+ {
+  ##############Chose interface###############
+  echo -e " Configure a Network Interface or a Destination Networks?\n
+  1. A Network Interface
+  2. No Network Interface. Destination Networks Only"
+	read opt_int
+	case $opt_int in
+		1) echo -e "\nPlease Enter a Network Interface."
+		read interface ;;
+        2) interface="NULL" ;;
+        *) echo -e "Wrong option Selected!!!"
+	esac
+  ###############Getting the Chain############
+  echo -e "Using Which Chain of Filter Table?\n
+  1. INPUT
+  2. OUTPUT
+  3. Forward"
+  read opt_ch
+  case $opt_ch in
+   1) chain="INPUT" ;;
+   2) chain="OUTPUT" ;;
+   3) chain="FORWARD" ;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ 
+  #########Getting Source IP Address##########
+  #Label
+   
+  echo -e "
+  1. Firewall using Single Source IP\n
+  2. Firewall using Source Subnet\n
+  3. Firewall using for All Source Networks\n
+  4. Firewall choose a source file contationing ip addesses"
+  read opt_ip
+   
+  case $opt_ip in
+   1) echo -e "\nPlease Enter the IP Address of the Source"
+   read ip_source ;;
+   2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)"
+   read ip_source ;;
+   3) ip_source="0/0" ;;
+   4) echo -e "\nPlease Enter the file name."
+   read ip_source ;;
+   
+   #5) ip_source = "NULL" ;;
+   *) echo -e "Wrong Option Selected"
+  esac
+  #########Getting Destination IP Address##########
+   echo -e "
+  1. Firewall using Single Destination IP\n
+  2. Firewall using Destination Subnet\n
+  3. Firewall using for All Destination Networks\n
+  4. Firewall using a file"
+
+  read opt_ip
+              case $opt_ip in
+        1) echo -e "\nPlease Enter the IP Address of the Destination"
+                     read ip_dest ;;
+        2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)"
+                     read ip_dest ;;
+        3) ip_dest="0/0" ;;
+		4) echo -e "\nPlease Enter the file name."
+        read ip_dest ;;
+		#5) ip_dest = "NULL" ;;
+               *) echo -e "Wrong Option Selected"
+       esac
+       ###############Getting the Protocol#############
+       echo -e "
+       1. All Traffic of TCP
+       2. Specific TCP Service
+       3. Specific Port
+	   4. Specific Port Number
+       5. Using no Protocol"
+       read proto_ch
+       case $proto_ch in
+        1) proto=TCP ;;
+        2) echo -e "Enter the TCP Service Name: (CAPITAL LETTERS!!!)"
+       read proto ;;
+        3) echo -e "Enter the Port Name: (CAPITAL LETTERS!!!)" 
+       read proto ;;
+	    4) echo -e "Enter the Port Number: " 
+       read proto ;;
+        5) proto="NULL" ;;
+        *) echo -e "Wrong option Selected!!!"
+       esac
+ 
+       #############What to do With Rule############# 
+       echo -e "What to do with Rule?
+       1. Accept the Packet
+       2. Reject the Packet
+       3. Drop the Packet
+       4. Create Log"
+       read rule_ch
+       case $rule_ch in 
+        1) rule="ACCEPT" ;;
+        2) rule="REJECT" ;;
+        3) rule="DROP" ;;
+        4) rule="LOG" ;;
+       esac
+	   
+	
+###################Generating the Rule####################
+echo -e "\n\tPress Enter key to Generate the Complete Rule!!!"
+read temp
+echo -e "The Generated Rule is \n"
+for ipdetails in `cat $ip_source`
+do
+
+if [[ $interface == *eth* ]] ; then
+		echo -e "\n$IPT -A $chain -s $ipdetails -i $interface -p $proto -j $rule\n "
+		gen=1
+	else if [ $interface == "NULL"] ; then
+		echo -e "\n$IPT -A $chain -s $ipdetails -d $ip_dest -p $proto -j $rule\n "
+		gen=2
+	else if [ $proto == "NULL" ]; then
+		echo -e "\niptables -A $chain -s $ip_source -d $ip_dest -j $rule\n"
+		gen=3
+	else if [[ $proto == * ]]; then
+		echo -e "\niptables -A $chain -s $ip_source -d $ip_dest -p $proto -j $rule\n"
+		gen=4
+fi 
+fi
+fi
+fi
+echo -e "\n\tDo you want to Enter the Above rule to the IPTABLES? Yes=1 , No=2"
+read yesno
+if [ $yesno == 1 ] && [ $gen == 1 ]; then
+	$IPT -A $chain -s $ipdetails -i $interface -p $proto -j $rule
+else if [ $yesno == 1 ] && [ $gen == 2 ]; then
+	$IPT -A $chain -s $ipdetails -d $ip_dest -p $proto -j $rule
+else if [ $yesno == 1 ] && [ $gen == 3 ]; then
+ iptables -A $chain -s $ip_source -d $ip_dest -j $rule
+else if [ $yesno == 1 ] && [ $gen == 4 ]; then
+ iptables -A $chain -s $ip_source -d $ip_dest -p $proto -j $rule         
+else if [ $yesno == 2 ]; then
+ 
+ main
+fi
+fi
+fi
+fi
+fi
+}
+
+main()
+{
+ ROOT_UID=0
+ if [ $UID == $ROOT_UID ];
+ then
+ clear
+ opt_main=1
+ while [ $opt_main != 4 ]
+ do
+echo -e "************************************************************************" 
+#############Check Whether the iptables installed or not############ 
+ echo -e "\t*****Main Menu*****\n
+ 1. Check Iptables Package\n
+ 2. Iptables Services\n
+ 3. Build Your Firewall with Iptables\n
+ 4. Exit"
+ read opt_main
+ case $opt_main in
+  1) echo -e "******************************"
+    rpm -q iptables 
+     echo -e "******************************" ;;
+  2) checkstatus ;;
+  3) buildfirewall ;;
+  4) exit 0 ;;
+  *) echo -e "Wrong option Selected!!!"
+ esac
+done
+else
+ echo -e "You Must be the ROOT to Perfom this Task!!!"
+fi
+}
+main
+exit 0
\ No newline at end of file
diff --git a/Man_tool/change_pass.sh b/Man_tool/change_pass.sh
new file mode 100755
index 0000000..a6fcc55
--- /dev/null
+++ b/Man_tool/change_pass.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+#scrpit to change root password from a csv file
+#<hostname>,<passwd>
+
+if [ $# -lt 1 ]
+then
+	echo "Syntax: ./$(basename $0) <file name>"
+  exit
+fi
+
+for csv in $(cat $1)
+do
+	
+	HOST=$(echo $csv |cut -d "," -f1)
+	PASS=$(echo $csv |cut -d "," -f2)
+
+ssh ansible@$HOST "echo root:$PASS |sudo chpasswd" 
+
+done
diff --git a/Man_tool/command_loop.sh b/Man_tool/command_loop.sh
new file mode 100755
index 0000000..073794f
--- /dev/null
+++ b/Man_tool/command_loop.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+
+
+#if [ $# -lt 1 ]
+#then
+#	echo "Syntax: ./$(basename $0) <file name>"
+#  exit
+#fi
+
+for csv in $(cat $1)
+do
+	
+	HOST=$(echo $csv |cut -d "," -f1)
+	HASH=$(echo $csv |cut -d "," -f2)
+
+#	echo -e $host "root:$HASH/"
+echo $HOST "vgs"
+
+
+#scp root@$host:/var/log/glusterfs/glustershd.log .
+#ssh -o ConnectTimeout=10 -n root@$host "tail -n 100 /var/log/glusterfs/glustershd.log" > gluster/$host
+
+done
+
+#cat gluster/*| grep "All subvolumes are down" | grep "0-vol"|cut -d " " -f7|sort|uniq
+
+
+#cat gluster/*| grep "failed" | grep "0-vol"|cut -d " " -f 7,8|sort|uniq
+
+#rm gluster/*
+#cat bricks_down |sort|uniq
diff --git a/Man_tool/uptime_loop.sh b/Man_tool/uptime_loop.sh
new file mode 100755
index 0000000..cd494e0
--- /dev/null
+++ b/Man_tool/uptime_loop.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+FILE=$1
+
+if [ $# -lt 1 ]
+then
+	echo "Syntax: ./$(basename $0) <file name>"
+  exit
+fi
+
+for host in $(cat ${FILE})
+do
+
+ssh -o ConnectTimeout=3 -n root@$host "hostname && uptime "
+
+done
diff --git a/Man_tool/ww b/Man_tool/ww
new file mode 100644
index 0000000..faf5b77
--- /dev/null
+++ b/Man_tool/ww
@@ -0,0 +1 @@
+127.0.0.1,DlXOTJUdJ8TdaqXh,$1$xyz$uNKesoUDbo.Uh7Ei3E8cn1
diff --git a/OpenShift Stuff/collect_info.sh b/OpenShift Stuff/collect_info.sh
new file mode 100644
index 0000000..934f1ad
--- /dev/null
+++ b/OpenShift Stuff/collect_info.sh	
@@ -0,0 +1,12 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :colection script for run_collect_info.sh this script collects the Total Processors, Memory RAM Total Disk size per host.
+#First line of code                             :09/10/2019
+#last update                                    :11/10/2019
+#version                                        :0.1
+#synatx example of hostfile                     :<hostname,contract code> contract code must be in uppercase and my contain numbers 
+
+echo -e "\tMemory(RAM) Info\t"`free -mt| awk '/Mem/{print " \tTotal, " $2 }'`
+echo -e "\t,Total Processor,\t"`grep -c 'processor' /proc/cpuinfo`
+TOTAL_HDD_SIZE=$(df  |grep "^/dev" |awk '{print $2}'|paste -sd+ | bc)
+echo -e "\t,Disks size,\t "$(echo "scale=2; $TOTAL_HDD_SIZE /1024^2" | bc)
diff --git a/OpenShift Stuff/run_collect_info.sh b/OpenShift Stuff/run_collect_info.sh
new file mode 100644
index 0000000..1511547
--- /dev/null
+++ b/OpenShift Stuff/run_collect_info.sh	
@@ -0,0 +1,50 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl                                   :
+#objective                                      :Script that scp's collect_info.sh from a host source file, and collects and sums-up Total Processors, Memory RAM Total Disk size contact code files.
+#First line of code                             :09/10/2019
+#last update                                    :11/10/2019
+#version                                        :0.1
+#synatx example of hostfile                     :<hostname,contract code> contract code must be in uppercase and my contain numbers 
+
+if [ $# -lt 1 ]
+then
+    echo "Syntax: ./$(basename $0) <file name with hosts and contract codes>"
+  exit
+fi
+CHECK_CONTACT_CODES=$(cat $1 |cut -d "," -f2| grep -oP '[a-z]'|wc -l)
+
+if [[ $CHECK_CONTACT_CODES -gt 0 ]]
+    then
+        echo "there is some issue with the contact code in the hostfile, please make sure that all contact cods are in uppercase"
+
+else
+#clean the results directory
+rm /opt/scripts/tools/collect_info/results/*
+
+    for host in $(cat $1)
+        do
+            HOST=$(echo $host|cut -d "," -f1)
+            CONTRACT_LIST=$(echo $host|cut -d "," -f2)
+            scp -q -p collect_info.sh $HOST:/root
+            SSH_OUT=$(ssh -n $HOST "/root/collect_info.sh")
+                if [[ $SSH_OUT == "please install the bc command" ]]
+                    then
+                        echo "please install the bc command on $HOST" && exit 1
+                    else
+                        printf "%s " "$HOST," >> results/$CONTRACT_LIST
+                        echo $SSH_OUT >> results/$CONTRACT_LIST
+                fi
+    done
+
+
+# sun-up the colleced data in to contact code files 
+for contr_file in $(ls /opt/scripts/tools/collect_info/results/)
+    do
+        RAM=$(cat results/$contr_file|cut -d "," -f3| paste -sd+ | bc )
+        CPU=$(cat results/$contr_file|cut -d "," -f5| paste -sd+ | bc )
+        HDD=$(cat results/$contr_file|cut -d "," -f7| paste -sd+ | bc )
+        echo "Total Processors $CPU" > /opt/scripts/tools/collect_info/results/$contr_file
+        echo "Memory RAM Total in MB $RAM" >> /opt/scripts/tools/collect_info/results/$contr_file
+        echo "Disk size in GB $HDD" >> /opt/scripts/tools/collect_info/results/$contr_file
+done
+fi
diff --git a/OpenShift Stuff/yum_update_tool_openshift.sh b/OpenShift Stuff/yum_update_tool_openshift.sh
new file mode 100644
index 0000000..6b7e4a0
--- /dev/null
+++ b/OpenShift Stuff/yum_update_tool_openshift.sh	
@@ -0,0 +1,193 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :OpenShift patching tool using yum (RHEL and Centos)
+#First line of code                             :04/09/2019
+#last update                                    :06/09/2019
+#version                                        :0.1
+#inspred by  /home/freark/bin/batch_upgrade.sh
+
+
+#Check if root is running the script
+if [[ $EUID -ne 0 ]]; then
+   echo "This script must be run as root" 
+   exit 1
+fi
+
+# Parameters
+NAGIOS_SCRIPT='/nagios_add_downtime_host.sh'
+BASE_LOG_DIR=/var/log/batch_upgrade
+TIMESTAMP=$(date +%Y%m%d.%H%M)
+
+#set the master host
+read -p "Enter OpenShift master: " OS_MASTER
+
+#Set node varible
+OS_NODES_READY=$(ssh -n $OS_MASTER "oc get nodes" |grep "Ready" | cut -d " " -f1)
+COUNT_OF_OS_NODES_DRAINED=$(ssh -n $OS_MASTER "oc get nodes" |egrep "NotReady|SchedulingDisabled" |wc -l)
+#TODO what if there are more that one node already driand?
+if [[ "$COUNT_OF_OS_NODES_DRAINED" -gt 0 ]] ; then
+  echo -e "n\ NOTE: There are driand nodes on the cluster\n
+    Please chack the master node for possible issues"
+    exit 1
+fi
+
+###############################OPENSHIFT PACHING BEGINS HERE###############################
+#list nodes on the OpenShift Master
+function list_nodes()
+{
+  printf '%s\n' "${OS_NODES_READY[@]}"
+  set_update_host
+}
+
+#set the hostname for the update
+function set_update_host()
+{
+echo "Set the OpenShift node that needs to updated or Press ^c to bailout/finish"
+read -p "Enter OpenShift node: " HOST_TO_UPDATE
+}
+
+#Breack in an error
+function pause_on_error {
+    if [ $1 -ne 0 ]
+    then
+        echo -e "\e[31mThe last command resulted in an error.\e[0m Press ^c to bailout or enter to continue"
+        read
+    fi
+}
+
+#Add nagios downtime
+function nagios_downtime()
+{
+  $NAGIOS_SCRIPT --host=$HOST_TO_UPDATE --comment='Batch Updating Host'
+  echo "Adding downtime for host $HOST_TO_UPDATE..."
+  pause_on_error $?
+}
+
+#just a counter, one minute
+function time_counter()
+{
+count=0
+total=120
+
+  while [ $count -lt $total ]; do
+    sleep 0.5 # this is work
+    count=$(( $count + 1 ))
+    pd=$(( $count * 60 / $total ))
+    printf "\r${pd}s" $(( $count * 60 / $total ))
+  done
+}
+
+#Drain the node
+function drain()
+{
+  echo "Draining $HOST_TO_UPDATE"
+  ssh -n $OS_MASTER "oc adm drain --ignore-daemonsets $HOST_TO_UPDATE"
+  echo "
+ ________________________________________________________________________
+< This will take a minute, Just making sure that the node is fully drained >
+ ------------------------------------------------------------------------
+        \   ^__^
+         \  (oo)\_______
+            (__)\       )\/
+                ||----w |
+                ||     ||
+
+  "
+  time_counter
+  pause_on_error $?
+}
+
+#Update node
+function update()
+{
+  mkdir -p ${BASE_LOG_DIR}
+  LOG_DIR=$(mktemp -d ${BASE_LOG_DIR}/${TIMESTAMP}.XXXX)
+
+  echo -e "n\I'm now going to update $HOST_TO_UPDATE."
+  echo "You can follow/check logs in:"
+  echo ${LOG_DIR}
+  echo "Use for instance 'tail -f ${LOG_DIR}/$HOST_TO_UPDATE' in a different terminal after continuing here."
+  echo "If any fail you MUST check and update these before proceeding!"
+  echo -e "\e[33mPress ^c to bailout or enter to continue\e[0m"
+  read
+  echo "This may take some time..."
+  echo "Please check the packge list, if docker/openshift/atomic are incluted than, STOP the update by reapling N to yum or Press ^c "
+  
+  #exclude openshift and docker
+  ssh -n $HOST_TO_UPDATE "cat /etc/yum.conf | grep -v exclude >/tmp/yum.conf && echo "exclude= docker* atomic* " >> /tmp/yum.conf && cat /tmp/yum.conf >/etc/yum.conf"
+  #update command
+  ssh -t $HOST_TO_UPDATE "sleep 10 && yum update" | tee ${LOG_DIR}/$HOST_TO_UPDATE
+  # ssh -n $HOST_TO_UPDATE  "sleep 10 && yum noninteractive -y update --security"
+  pause_on_error $?
+}
+
+#reboot node
+function reboot_server()
+{
+LOG_DIR=$(mktemp -d ${BASE_LOG_DIR}/${TIMESTAMP}.XXXX)
+    
+
+  echo "Restarting server $HOST_TO_UPDATE"
+  #ANSWER='dummyvalue'
+  while [[ -n "${ANSWER}" || ( "${ANSWER}" != 'c' && "${ANSWER}" != 's' ) ]]; do
+    echo -e "\e[33mPress 'c' continue, 's' to skip, or ^c to bail out...\e[0m"
+      read ANSWER
+        if [[ "${ANSWER}" == 's' ]]; then
+            echo "Skipping $HOST_TO_UPDATE"
+            return 0
+        fi
+        if [[ "${ANSWER}" == 'c' ]]; then
+            echo "Proceeding to reboot $HOST_TO_UPDATE"
+            break
+        fi
+  done
+   
+    timeout 4 ssh -o ConnectTimeout=3 $HOST_TO_UPDATE "reboot"
+    # no pause on reboot, because often you get kicked out of the server too quickly causing an non-zero exitcode
+    # pause_on_error $?
+
+    # wait until the server is down
+    ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+    rc=$?
+    while [[ $rc == 0 ]]
+    do
+        echo "Waiting for $HOST_TO_UPDATE to be down..."
+        ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+        rc=$?
+        sleep 0.5
+    done
+
+    echo "Server $HOST_TO_UPDATE appears to be down..."
+
+    # wait until...
+    # server pings again
+
+    ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+    rc=$?
+    while [[ $rc != 0 ]]
+    do
+      echo "Waiting for $HOST_TO_UPDATE to be back up..."
+      ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+      rc=$?
+      sleep 5
+    done
+}
+
+#uncordon node in the OpenShift master
+function uncordon()
+{
+  echo "------------------------------------"
+  echo "Reactivating $HOST_TO_UPDATE in the OpenShift master $OS_MASTER"
+  ssh -n $OS_MASTER "oc adm uncordon $HOST_TO_UPDATE"
+  list_nodes
+  pause_on_error $?
+}
+
+
+############################### -MAIN RUN- ###############################
+list_nodes
+nagios_downtime
+drain
+update
+reboot_server
+uncordon
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..e69de29
diff --git a/WsConfman/confman/hostlist/192.168.2.100 b/WsConfman/confman/hostlist/192.168.2.100
new file mode 100644
index 0000000..c80d6b1
--- /dev/null
+++ b/WsConfman/confman/hostlist/192.168.2.100
@@ -0,0 +1,2 @@
+first_start
+jb{RWfnu
diff --git a/WsConfman/confman/hostlist/192.168.2.163 b/WsConfman/confman/hostlist/192.168.2.163
new file mode 100644
index 0000000..b96fa1d
--- /dev/null
+++ b/WsConfman/confman/hostlist/192.168.2.163
@@ -0,0 +1,2 @@
+first_start
+>X1nr0.E
diff --git a/WsConfman/confman/managemnt.sh b/WsConfman/confman/managemnt.sh
new file mode 100755
index 0000000..b1253be
--- /dev/null
+++ b/WsConfman/confman/managemnt.sh
@@ -0,0 +1,60 @@
+#!/bin/bash 
+#(c) Roy Cohen 12/06/2017    :roy@wondercohen.nl
+#original script             :My own work
+#objective                   :Linux workstation configration manger
+#last update                 :
+#version
+
+
+#Varibles
+CLIENT_ARR=( `sudo tail -50 /var/log/secure | grep "Did not receive identification string from" |cut -d " " -f12| sort | uniq` )
+CLIENT_PATH="$HOME/confman/hostlist/"
+CLIENT=(`ls $CLIENT_PATH`) 
+
+# Functions 
+function add_client {
+#Check if the client is known and add the cilent if it is not known in the system 
+for client in "${CLIENT_ARR[@]}"; do
+	if [ -f $CLIENT_PATH$client ] ; then
+		echo "$CLIENT_PATH$client already exists"
+	else 
+		echo "" > $CLIENT_PATH$client
+	fi
+done
+}
+
+function add_ssh_ECDSA {
+#Check if the client is known and add the ssh ECDSA key fingerprint to ~/.ssh/known_hosts
+for client in "${CLIENT[@]}"; do
+	grep "$client" $HOME/.ssh/known_hosts > /dev/null
+
+        	if [ $? -eq 0 ] ; then
+                	echo " $client already known at ~/.ssh/known_hosts"
+         	else
+                	ssh-keyscan $client >> ~/.ssh/known_hosts 
+         	fi
+done
+
+}
+
+#ssh root@$CLIENT "md5sum /etc/ssh/sshd_config"
+#Check if first_start.sh as run on the client, if not than copy the first_start.sh to the client and run it
+function first_start {
+#FIST_START=`head -1 $CLIENT_PATH$CLIENT`
+
+for cilent in "${CLIENT[@]}"; do
+	head -1 $CLIENT_PATH$cilent | grep first_start > /dev/null
+
+		if [ $? -eq 0 ] ; then
+			echo "$cilent has allready run first_start"
+		else
+			scp ~/confman/scripts/first_start.sh root@$cilent:/root && echo "first_start" > $CLIENT_PATH$cilent
+			ssh  root@$cilent '/root/first_start.sh' >> $CLIENT_PATH$cilent && ssh root@$cilent 'rm /root/first_start.sh'
+		fi
+done
+}
+
+#call funcions
+add_client
+add_ssh_ECDSA
+first_start
diff --git a/WsConfman/confman/scripts/first_start.sh b/WsConfman/confman/scripts/first_start.sh
new file mode 100755
index 0000000..40228ad
--- /dev/null
+++ b/WsConfman/confman/scripts/first_start.sh
@@ -0,0 +1,9 @@
+#!/bin/bash
+
+PASS=`< /dev/urandom tr -dc A-Za-z0-9'"<>,./?!@#$%^&(){}[]' | head -c8`
+oldPassword="Test2001"
+newPassword=$PASS
+rootdevice="/dev/sda3"
+printf '%s\n' "$oldPassword" "$newPassword" "$newPassword" |sudo cryptsetup luksAddKey $rootdevice
+printf '%s\n' "$oldPassword" |sudo cryptsetup luksRemoveKey $rootdevice
+echo $newPassword
diff --git a/WsConfman/ks.cfg b/WsConfman/ks.cfg
new file mode 100644
index 0000000..78f09be
--- /dev/null
+++ b/WsConfman/ks.cfg
@@ -0,0 +1,164 @@
+#version=RHEL7
+# Install OS instead of upgrade
+install
+cdrom
+
+# Reboot the machine after the installation is complete
+# and attempt to eject the CD/DVD/Bootdisk
+#reboot --eject
+
+# Setup network interfaces via DHCP
+network --device=enp0s3 --bootproto=dhcp --onboot=yes --activate
+
+# Install from an installation tree on a remote server 
+# Required when using a minimal ISO
+#url --url=http://mirror.centos.org/centos/$releasever/os/$basearch/
+
+# install in text mode
+text
+#Shut down nd power off the system after the installation has successfully completed.
+#poweroff
+reboot
+
+# System keyboard
+keyboard us
+
+xconfig --startxonboot
+
+# System language
+lang en_US.UTF-8
+
+#set root pw here (required by KS), remove pw in post
+## (Required) Sets the root password so there is no prompt during installation
+# Example: encrypted password is "Test2001"
+# to generate the hash mkpasswd --method=sha-512
+rootpw Test2001
+authconfig --enableshadow --passalgo=sha512
+
+#user
+user --groups=test --homedir=/home/test --name=test1 --password=Test2001 --gecos="test"
+
+#Block ssh
+firewall --enabled --service=ssh
+#Dont start firstboot dialoge
+firstboot --disabled
+eula --agreed
+
+# SELinux configuration
+# By default, selinux is enforcing
+#selinux --enforcing
+selinux --permissive
+
+# Services
+services --enabled=ntpd,ntpdate
+
+# Installation logging level
+logging --level=debug
+
+# System timezone
+timezone  Europe/Amsterdam
+
+# System bootloader configuration
+bootloader --location=mbr --driveorder=sda --append="rhgb quiet"
+#Network configuration
+network --device=enp0s3 --bootproto=dhcp --onboot=yes --activate
+
+# Clear the Master Boot Record
+zerombr
+
+# Automatically create partitions, no LVM
+#autopart --nolvm
+
+# Partition clearing information
+clearpart --all --initlabel
+
+# Create primary partitions
+part /boot --fstype "ext3" --size=1024 --asprimary
+part swap --fstype swap --size=8024
+part pv.01 --size=1 --grow --encrypted --passphrase=Test2001
+#part pv.01 --size=1 --grow 
+
+# Create more logical partitions
+volgroup vgroup1 pv.01
+logvol /     --fstype ext3 --name=root --vgname=vgroup1 --size=10240
+logvol /tmp  --fstype ext3 --name=temp --vgname=vgroup1 --size=5120 --fsoptions="nodev,noexec,nosuid"
+logvol /home --fstype ext3 --name=home --vgname=vgroup1 --size=1 --grow --fsoptions="nodev"
+logvol /var  --fstype ext3 --name=var  --vgname=vgroup1 --size=5120 --fsoptions="nodev"
+
+%packages
+@base
+@core
+@desktop-debugging
+@fonts
+@gnome
+@gnome-desktop
+@guest-agents
+@guest-desktop-agents
+@input-methods
+@internet-browser
+@multimedia
+@print-client
+@print-server
+@x11
+-sysreport
+
+%end
+
+
+%post --nochroot --log=/mnt/sysimage/var/log/ks.post01.log
+#!/bin/bash
+
+set -x
+
+%end
+
+%post --log=/var/log/ks.post02.log
+#!/bin/bash
+
+set -x
+
+# Remove root password
+#echo "Removing root password"
+#passwd -d root
+
+# Make sure we have the latest security updates
+echo "Updating packages"
+/usr/bin/yum clean all
+/usr/bin/yum update -y
+# Install Node.js and json via EPEL
+/usr/bin/yum install -y epel-release
+/usr/bin/yum install -y nodejs
+/usr/bin/npm install -g json
+# Clean up all yum caches
+echo "Cleaning up yum caches"
+/usr/bin/yum clean all
+# Disable kdump
+echo "Disabling kdump"
+systemctl disable kdump.service
+# Ensure we have sane and consistent defaults for ntp.conf
+sed s/restrict\ default\ nomodify\ notrap\ nopeer\ noquery/restrict\ default\ kod\ nomodify\ notrap\ nopeer\ noquery/ -i /etc/ntp.conf
+# For IPv6
+echo "restrict -6 default kod nomodify notrap nopeer noquery" >> /etc/ntp.conf
+sed s/restrict\ ::1/restrict\ -6\ ::1/ -i /etc/ntp.conf
+# Disable password auth. SSH logon is via ssh key only. A password is being set
+# for root via the image manifest per IMAGE-459.
+echo "Disabling password auth in sshd_config"
+sed s/PasswordAuthentication\ yes/PasswordAuthentication\ no/ -i /etc/ssh/sshd_config
+# Clean up files
+echo "Ceaning up build files"
+/bin/rm -rf /root/anaconda-ks.cfg
+/bin/rm -rf /tmp/.npm/
+/bin/rm -rf /tmp/ks-script*
+/bin/rm -rf /var/log/anaconda
+
+# cronjob
+echo "*/5 * * * * nc 192.168.2.129 22 < /dev/null" > /var/spool/cron/root
+chmod 600 /var/spool/cron/root
+
+#ssh key
+mkdir /root/.ssh
+chmod 700 /root/.ssh
+echo "ssh-rsa Ack man1@localhost.localdomain" > /root/.ssh/authorized_keys
+chmod 600 /root/.ssh/authorized_keys
+
+%end
diff --git a/post_install.sh b/post_install.sh
new file mode 100644
index 0000000..0167ba2
--- /dev/null
+++ b/post_install.sh
@@ -0,0 +1,380 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#Wonder Cohen                                   :The Hague The Netherlands
+#objective                                      :Post install script for master node/ansible node 
+#First line of code                             :07/Mar/2020
+#last update                                    :15/Nov/2021
+#version                                        :1.0
+#synatx example                                 :./<script.sh>
+
+
+# VARS
+#hostnamectl set-hostname lx-ubt-rtm0-101.wondercohen.org
+DEB_OS="/etc/lsb-release"
+RHEL_OS="/etc/redhat-release"
+MY_IP=""
+SOURCE_CONNECTION=$(w -i |tail -n1|cut -d " " -f8)
+
+#SOURCE_IP=$(last -a | grep "logged in"|awk '{print $10}')
+mkdir -p /root/tools
+
+function install_software(){
+echo "*** Starting install software function ***"
+if test -f "$DEB_OS"; then
+            apt -y install net-tools
+            apt -y install git bash-completion fail2ban
+            apt -y update && apt -y upgrade
+    else
+                yum install -y vim wget curl net-tools lsof bind-utils epel-release bash-completion git
+                yum install -y fail2ban
+                yum install -y aide
+                yum -y update
+fi
+}
+
+function issue_motd(){
+echo "*** Starting /etc/issue ***"
+echo -e "
+ ------------------------------------------------------------------------
+|                       *** NOTICE TO USERS ***                          |
+| This computer system is the private property of Wonder Cohen           |
+| It is for authorized use only.                                         |
+|                                                                        |
+| Users (authorized or unauthorized) have no explicit or implicit        |
+| expectation of privacy.                                                |
+|                                                                        |
+| Any or all uses of this system and all files on this system may be     |
+| intercepted, monitored, recorded, copied, audited, inspected, and      |
+| disclosed to your employer, to authorized site, government, and law    | 
+| enforcement personnel, as well as authorized officials of government   |
+| agencies, both domestic and foreign.                                   |
+|                                                                        |
+| By using this system, the user consents to such interception,          |
+| monitoring, recording, copying, auditing, inspection, and disclosure   |
+| at the discretion of such personnel or officials.  Unauthorized or     |
+| improper use of this system may result in civil and criminal penalties |
+| and administrative or disciplinary action, as appropriate. By          |
+| continuing to use this system you indicate your awareness of and       |
+| consent to these terms and conditions of use. LOG OFF IMMEDIATELY if   |
+| you do not agree to the conditions stated in this warning.             |
+ ------------------------------------------------------------------------
+You Are Logedin from: $(w -i |tail -n1|cut -d " " -f8)
+" >/etc/issue
+cat /etc/issue > /etc/issue.net
+}
+
+function tooling(){
+echo "*** Starting Tooling function ***"
+if test -f "$DEB_OS"; then
+#grep -E -o "(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)"
+#grep -E -o "(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)"
+echo -e "#script to block malicious IP sources for Wonder Cohen 23-jun-2021
+#!/bin/bash
+for ip_to_block in \$(cat /var/log/ufw.log |grep -E -oh \"SRC=(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\"|grep -v \"SRC=0.0.0.0\"|cut -d \"=\" -f2|sort|uniq -c|sort -n| tail -n 20 | awk '{print \$2}')
+do
+ufw reject proto tcp from \$ip_to_block
+echo >/var/log/ufw.log
+done
+ " > /root/tools/block_ip.sh
+ chmod 700 /root/tools/block_ip.sh
+# echo "0 23 * * * root /root/tools/block_ip.sh" >> /etc/crontab
+ 
+ else
+
+echo -e "#script to block malicious IP sources for Wonder Cohen 23-jun-2021
+#!/bin/bash
+for ip_to_block in \$(cat /var/log/firewall-droppd.log |grep -E -oh \"SRC=(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\"|grep -v \"SRC=0.0.0.0\"|cut -d \"=\" -f2|sort|uniq -c|sort -n| tail -n 20 | awk '{print \$2}')
+do
+firewall-cmd --permanent --add-rich-rule=\"rule family='ipv4' source address='$ip_to_block' drop\"
+firewall-cmd --reload
+echo > /var/log/firewall-droppd.log
+done
+ " > /root/tools/block_ip.sh
+ chmod 700 /root/tools/block_ip.sh
+# echo "0 23 * * * root /root/tools/block_ip.sh" >> /etc/crontab
+fi
+}
+
+function shell_sh(){
+
+echo "*** Starting shell_sh function ***"
+mkdir -p /var/log/history/
+chmod 1723 /var/log/history
+echo "ALL ALL= NOPASSWD: /usr/bin/chattr +a /var/log/history/*" > /etc/sudoers.d/chattr
+chmod 440 /etc/sudoers.d/chattr
+
+echo -e "
+#Roy Cohen                                      :roy@wondercohen.nl
+#Wonder Cohen                                   :The Hague The Netherlands
+#objective                                      :create a historyfile of all user activites also after sudo command
+#location                                       :/etc/profile.d/shell.sh
+#First line of code                             :02/Nov/2020
+#last update                                    :15/Nov/2021
+#version                                        :1.0
+#Aditinal info                                  :inspired by a similar script by E. de Wolf version 151119
+#Instructions for installation                  :cp the contant to /etc/profile.d/shell.sh
+#                                               :mkdir /var/log/history/
+#                                               :chmod 1723 /var/log/history
+#                                               :Add to sudoers file:  ALL ALL= NOPASSWD: /usr/bin/chattr +a /var/log/history/*
+
+#Vars
+DATE=\$(date +%Y%m%d%H%M)
+
+#Users
+ACTIVE_USER=\$(whoami)
+SOURCE_USER=\$(who -m | awk '{ print \$1 }')
+#Path
+LOG_LOCATION="/var/log/history/\$\(whoami\)_\$SOURCE_USER.log"
+
+#timeout logoff
+TMOUT=900
+export TMOUT
+readonly TMOUT
+
+# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
+#unlimited
+export HISTFILESIZE=
+export HISTSIZE=
+
+export \$SOURCE_USER
+export HISTFILE=\$LOG_LOCATION
+export HISTIGNORE=''
+export HISTCONTROL='ignoreboth' 
+export HISTTIMEFORMAT=\${HISTTIMEFORMAT:-%F %H:%M:%S }
+
+shopt -s histappend
+export PROMPT_COMMAND=\"history -a; \$PROMPT_COMMAND\"
+
+readonly HISTFILE
+readonly HISTIGNORE
+#lock hisroty files Files       
+        [[ ! -f \$LOG_LOCATION ]] && touch \$LOG_LOCATION && chmod 0600 \$LOG_LOCATION && sudo /usr/bin/chattr +a \$LOG_LOCATION
+" > /etc/profile.d/shell.sh
+chmod +x /etc/profile.d/shell.sh
+        
+}
+
+function sshd_config(){
+echo "*** Starting Ssh function ***"
+echo -e " #ssh config for Wonder Cohen 23-jun-2021
+SyslogFacility AUTHPRIV
+PermitRootLogin no
+MaxAuthTries 6
+MaxSessions 5
+AuthorizedKeysFile      .ssh/authorized_keys
+PermitEmptyPasswords no
+PasswordAuthentication no
+ChallengeResponseAuthentication no
+GSSAPIAuthentication yes
+GSSAPICleanupCredentials no
+UsePAM yes
+X11Forwarding yes
+PrintMotd no
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
+AcceptEnv XMODIFIERS
+LogLevel INFO
+Protocol 2
+IgnoreRhosts yes
+HostbasedAuthentication no
+PermitUserEnvironment no
+ClientAliveInterval 15m
+ClientAliveCountMax 0
+LoginGraceTime 60
+MaxStartups 10:30:60
+AllowTcpForwarding no
+Ciphers aes128-ctr,aes192-ctr,aes256-ctr
+Banner /etc/issue.net
+" > /etc/ssh/sshd_config
+
+systemctl restart sshd
+#mkdir -p /home/rcohen/.ssh/
+#chown rcohen:rcohen /home/rcohen/.ssh/
+#chmod 700 /home/rcohen/.ssh/
+#chmod 600 /home/rcohen/.ssh/authorized_keys
+#chown rcohen:rcohen /home/rcohen/.ssh/authorized_keys
+}
+
+function firewall(){
+echo "*** Starting firewalld function ***"
+
+if test -f "$DEB_OS"; then
+        systemctl enable ufw
+        ufw --force enable
+else
+
+systemctl enable firewall
+systemctl start firewalld
+
+echo -e "#firewalld.conf config for Wonder Cohen 23-jun-2021
+DefaultZone=public
+MinimalMark=100
+CleanupOnExit=yes
+Lockdown=no
+IPv6_rpfilter=yes
+IndividualCalls=no
+LogDenied=all
+AutomaticHelpers=system
+AllowZoneDrifting=yes
+" > /etc/firewalld/firewalld.conf
+firewall-cmd --reload
+
+echo -e "#rsyslog_firewal logging config for Wonder Cohen 23-jun-2021
+:msg,contains,"_DROP" /var/log/firewall-droppd.log
+:msg,contains,"_REJECT" /var/log/firewall-droppd.log
+& stop
+" > /etc/rsyslog.d/firewalld-droppd.conf
+systemctl restart rsyslog.service
+fi
+}
+
+function firewall_rules(){
+echo "*** Starting firewall_rules function ***"
+if test -f "$DEB_OS"; then
+        ufw allow proto tcp from $MY_IP
+
+        ufw allow proto tcp from $SOURCE_CONNECTION
+        ufw allow proto tcp from 1/24
+        ufw default deny incoming
+        ufw reload
+else
+firewall-cmd --set-log-denied=all
+firewall-cmd --get-log-denied
+firewall-cmd --permanent --remove-service=dhcpv6-client --zone=public
+firewall-cmd --permanent --remove-service=cockpit --zone=public
+firewall-cmd --permanent --remove-service=ssh --zone=public
+firewall-cmd --zone=drop --permanent --add-service=http
+firewall-cmd --zone=drop --permanent --add-service=https
+firewall-cmd --zone=drop --permanent --add-service=samba-client
+firewall-cmd --zone=drop --permanent --add-service=dhcpv6-client
+firewall-cmd --zone=drop --permanent --add-service=cockpit
+firewall-cmd --zone=drop --permanent --add-service=ssh
+firewall-cmd --zone=trusted --permanent --add-source=$MY_IP
+firewall-cmd --zone=trusted --permanent --add-source=$SOURCE_CONNECTION
+firewall-cmd --reload
+fi
+}
+
+function fail2ban(){
+echo "*** Starting Fail2ban function ***"
+systemctl enable fail2ban && sudo systemctl start fail2ban 
+echo -e "
+[DEFAULT]
+# Ban IP/hosts for 24 hour ( 24h*3600s = 86400s):
+bantime = 86400
+
+# An ip address/host is banned if it has generated "maxretry" during the last "findtime" seconds.
+findtime = 600
+maxretry = 5
+
+# "ignoreip" can be a list of IP addresses, CIDR masks or DNS hosts. Fail2ban
+# will not ban a host which matches an address in this list. Several addresses
+# can be defined using space (and/or comma) separator. For example, add your
+# static IP address that you always use for login such as 103.1.2.3
+#ignoreip = 127.0.0.1/8 ::1 103.1.2.3
+
+# Call iptables to ban IP address
+banaction = iptables-multiport
+
+# Enable sshd protection
+[sshd]
+enabled = true
+" > /etc/fail2ban/jail.local
+systemctl restart fail2ban
+}
+
+function network_setting(){
+echo "*** Starting Network function ***"
+if test -f "$DEB_OS"; then
+SET_IP=$(ip -4 a show ens3|grep inet|cut -d "." -f4|cut -d "/" -f1)
+HOSTNAME=$(hostname -f|cut -d "." -f1|cut -d "-" -f4)
+if [ "$HOSTNAME" -ge 99 ] && [ "$HOSTNAME" -le 200 ];
+        then
+                echo -e "
+network:
+ version: 2
+ renderer: networkd
+ ethernets:
+  ens8:
+   dhcp4: yes
+   optional: true
+   dhcp6: no
+   addresses:
+   -
+        else
+                echo -e "
+network:
+ version: 2
+ renderer: networkd
+ ethernets:
+  ens8:
+   dhcp4: yes
+   optional: true
+   dhcp6: no
+   addresses:
+   - 
+fi
+netplan apply
+
+else
+
+SET_IP=$(ip -4 a show eth0 |grep inet|cut -d "." -f4|cut -d "/" -f1)
+HOSTNAME=$(hostname -f|cut -d "." -f1|cut -d "-" -f4)
+
+if [ "$HOSTNAME" -ge 99 ] && [ "$HOSTNAME" -le 200 ];
+        then
+                echo -e "
+                DEVICE=eth1\n
+                ONBOOT=yesn\n
+                NETBOOT=yes\n
+                BOOTPROTO=static\n
+                IPADDR=1\n 
+                NETMASK=255.255.255.0\n
+                ZONE=public\n
+                " >/etc/sysconfig/network-scripts/ifcfg-eth1
+        else
+                echo -e "
+                DEVICE=eth1
+                ONBOOT=yes
+                NETBOOT=yes
+                BOOTPROTO=static
+                IPADDR=1....$SET_IP
+                NETMASK=255.255.255.0
+                ZONE=public\n
+                " >/etc/sysconfig/network-scripts/ifcfg-eth1
+        fi
+systemctl restart network.service
+fi
+}
+#https://kifarunix.com/install-and-configure-aide-on-ubuntu-20-04/
+function aide(){
+echo "*** Starting aide function ***"
+apt -y install aide
+aideinit
+cp /var/lib/aide/aide.db{.new,}
+cp /var/lib/aide/aide.conf.autogenerated /etc/aide/aide.conf
+aide -c /etc/aide/aide.conf -C
+echo "0 0 * * * root /usr/sbin/aide -c /etc/aide/aide.conf -C" >> /etc/crontab
+}
+
+function main(){
+HOSTNAME_VAR=$(hostname -f|cut -d "." -f1|cut -d "-" -f4)
+if [ "$HOSTNAME_VAR" -ge 99 ];
+        then
+        install_software
+        issue_motd
+        sshd_config
+        shell_sh
+        firewall
+        firewall_rules
+        fail2ban
+        network_setting
+        tooling
+#aide
+else
+        echo "Please set a valid hostname"
+fi
+}
+
+main 2>&1 | tee /root/$(hostname)_$(date +%Y%m%d%H%M).log
diff --git a/scripts/IptablesCleanTool.sh b/scripts/IptablesCleanTool.sh
new file mode 100644
index 0000000..a512dcb
--- /dev/null
+++ b/scripts/IptablesCleanTool.sh
@@ -0,0 +1,57 @@
+#!/bin/bash
+#(c) Roy Cohen 29/11/2012    :roy@wondercohen.nl
+#objective                   :IPtables administering tool that cleans duplicate rules
+#last update                 :29/11/2012
+#version                     :0.1
+
+# Parameters
+IPT=/sbin/iptables
+
+
+function check_duplicate()
+{
+
+
+
+
+}
+
+
+function clean_duplicate()
+{
+
+
+}
+
+
+
+function main()
+{
+ ROOT_UID=0
+ if [ $UID == $ROOT_UID ];
+ then
+ clear
+ OPT_MAIN=1
+ while [ $OPT_MAIN != 4 ]
+ do
+echo -e "************************************************************************" 
+#############Check Whether the iptables installed or not############ 
+ echo -e "\t**********************|Main Menu|***************************\n
+ 1. Check for Duplicate Rules\n
+ 2. Clean the Duplicate Rules\n
+ 3. Save the Iptables\n
+ 4. Exit"
+ read OPT_MAIN
+ case $OPT_MAIN in
+  1) check_duplicate ;;
+  2) clean_duplicate ;;
+  3) exit 0 ;;
+  *) echo -e "Wrong option Selected!"
+ esac
+done
+else
+ echo -e "You Must be the ROOT to Perfom this Task!"
+fi
+}
+main
+exit 0
diff --git a/scripts/IptablesTool.sh b/scripts/IptablesTool.sh
new file mode 100644
index 0000000..5e1637c
--- /dev/null
+++ b/scripts/IptablesTool.sh
@@ -0,0 +1,745 @@
+#!/bin/bash
+#(c) Roy Cohen 23/11/2012    :roy@wondercohen.nl
+#original script             :http://www.howtoforge.com/bash-script-for-configuring-iptables-firewall
+#objective                   :IPtables administering tool
+#last update                 :29/11/2012
+#version                     :0.2
+
+
+# Parameters
+IPT="/sbin/iptables"
+IPTSAVE="/etc/init.d/iptables save"
+
+
+echo -e""
+###############################IPTABLE SERVICES PROGRAM BEGINS HERE###############################
+function checkstatus()
+ {
+  opt_checkstatus=1
+ while [ $opt_checkstatus != 7 ]
+      do
+       clear
+  #echo -e "\nChoose the Option Bellow!!!\n
+  echo -e "\n\t*****Note: Save your Iptables before stop/Restart the iptables Services*****\n"
+  echo -e "   1. Save the iptables\n
+   2. Status of Iptables\n
+   3. Start iptables Services\n
+   4. Stop iptables Services\n
+   5. Restart iptable Services\n
+   6. Flush iptables (**Use Carefully_it will remove all the rules from iptables**)\n
+   7. Go back to Main Menu"
+  read opt_checkstatus
+  case $opt_checkstatus in
+   1) echo -e "*******************************************************\n" 
+               /etc/init.d/iptables save 
+      echo -e "\n*******************************************************\n"
+    echo -e "Press Enter key to Continue..."
+    read temp;;
+   2) echo -e "*******************************************************\n"
+               /etc/init.d/iptables status 
+      echo -e "*******************************************************"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   3) echo -e "*******************************************************\n"  
+               /etc/init.d/iptables start 
+      echo -e "*******************************************************\n"
+                                 echo -e "Press Enter key to Continue..."
+                                       read temp;;
+   
+   4) echo -e "*******************************************************\n"
+               /etc/init.d/iptables stop
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+     
+             5) echo -e "*******************************************************\n"
+                      /etc/init.d/iptables restart 
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   6) iptables -F 
+   echo -e "*******************************************************"
+   echo -e "All the Rules from the Iptables are Flushed!!!"
+   echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                 read temp;;
+   7) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+ }
+###############################BUILD FIREWALL PROGRAM BEGINS FROM HERE############################### 
+function buildfirewall()
+ {
+   function buildfirewallprogram ()
+   {
+      ###############Getting the Chain############
+      clear
+      echo -e "Using Which Chain of Filter Table?\n
+      1. INPUT
+      2. OUTPUT
+      3. Forward
+      4. Go back to Main Menu"
+      read opt_ch
+      case $opt_ch in
+       1) chain="INPUT" ;;
+       2) chain="OUTPUT" ;;
+       3) chain="FORWARD" ;;
+       4) main;;
+       *) echo -e "Wrong Option Selected!!!"
+      esac
+ 
+
+      #########Getting Source IP Address##########
+      #Label
+       
+      echo -e "Please the Source IP Address\n
+      1. Firewall using Single Source IP
+      2. Firewall using Source Subnet
+      3. Firewall using for All Source Networks
+      4. Firewall choose a source file containing ip addesses
+      5. Go back to Main Menu"
+      read opt_ip_srource
+       
+      case $opt_ip_srource in
+       1) echo -e "\nPlease Enter the IP Address of the Source"
+       read ip_source ;;
+       2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)"
+       read ip_source ;;
+       3) ip_source="0/0" ;;
+       4) echo -e "\nPlease Enter the file name."
+       read ip_source ;;
+       5) main;;
+       #6) ip_source = "NULL" ;;
+       *) echo -e "Wrong Option Selected"
+      esac
+		
+      ##############Chose interface###############
+      echo -e " \nDo you want to Configure a Network Interface or a Destination Networks?\n
+      1. Configure a Network Interface
+      2. Configure a Destination Networks Only
+      3. Go back to Main Menu"
+        read opt_int
+        case $opt_int in
+            1) echo -e "\nPlease Enter a Network Interface."
+            read interface ;;
+            2) interface="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+        esac 
+	
+	if [ $opt_int == "2" ]; then
+      #########Getting Destination IP Address##########
+      echo -e "Please Enter the IP Address of the Destination\n
+      1. Firewall using Single Destination IP
+      2. Firewall using Destination Subnet
+      3. Firewall using for All Destination Networks
+      4. Go back to Main Menu"
+
+      read opt_ip_dest
+        case $opt_ip_dest in
+            1) echo -e "\nPlease Enter the IP Address of the Destination"
+            read ip_dest ;;
+            2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)"
+            read ip_dest ;;
+            3) ip_dest="0/0" ;;
+            4) main;;
+            *) echo -e "Wrong Option Selected"
+           esac
+		   
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+	
+     #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	else
+
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+             
+           #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	fi
+}
+###################Generating the Rule####################
+buildfirewallprogram
+
+function generate_rule_single_ip()
+{
+		if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=1
+		elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule"
+			gen=2
+		elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface --dport $port -j $rule"
+			gen=3
+		elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=4
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=5
+		elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule"
+			gen=6
+		elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest --dport $port -j $rule"
+			gen=7
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=8
+	fi
+
+echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+read yesno
+
+	if [ $yesno == 1 ] && [ $gen == 1 ]; then
+		$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+		$IPT -A $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+		$IPT -A $chain -s $ip_source -i $interface --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+		$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+	elif [ $yesno == 2 ]; then
+
+	main
+	fi
+	
+}
+
+function generate_rule_multiple_ip()
+{
+    for ipdetails in `cat $ip_source`
+    do
+		if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+			gen=1
+		elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule"
+			gen=2
+		elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface --dport $port -j $rule"
+			gen=3
+		elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+			gen=4
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=5
+		elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule"
+			gen=6
+		elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest --dport $port -j $rule"
+			gen=7
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=8
+		fi
+done
+
+echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+read yesno
+	for ipdetails in `cat $ip_source`
+	do
+		if [ $yesno == 1 ] && [ $gen == 1 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 2 ]; then
+		main
+		fi
+	done
+}
+
+echo -e "\n\tPress Enter key to Generate the Complete Rule!!!"
+read temp
+echo -e "The Generated Rule is \n"
+##CHOSE TO LOOP A FILE OR A SINGLE IP ADDRESS ###################################
+
+if [ $opt_ip_srource == "1" ] || [ $opt_ip_srource == "2" ] ; then
+    generate_rule_single_ip 2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+	echo -e "Press Enter key to Continue..."
+    read temp
+	main
+else
+    generate_rule_multiple_ip 2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+	echo -e "Press Enter key to Continue..."
+    read temp
+	main
+fi
+
+}
+
+##############################DELETE FIREWALL PROGRAM BEGINS FROM HERE############################### 
+function delfirewall()
+{
+    function deleteonerule () 
+    {
+	echo -e "
+      1. Delete one rule
+      2. Go back to Main Menu"
+      read opt_delete_one_rule
+
+      case $opt_delete_one_rule in
+       1) echo -e "\nPlease Eneter the Rule."
+       read one_rule ;;
+       2) main;;
+       *) echo -e "Wrong Option Selected"
+      esac
+    echo "$one_rule"| sed 's/-A/-D/g'
+    echo "Do you want to remove this rule, Yes=1 , No=2"
+    read yesno
+
+    if [ $yesno == 1 ] ; then
+    $IPT `echo $one_rule |  sed 's/-A/-D/g'`
+    else
+    main
+    fi
+    }  
+
+    function delprogram ()
+    {
+	###############Getting the Chain############
+      clear
+      echo -e "Using Which Chain of Filter Table?\n
+      1. INPUT
+      2. OUTPUT
+      3. Forward
+      4. Go back to Main Menu"
+      read opt_ch
+      case $opt_ch in
+       1) chain="INPUT" ;;
+       2) chain="OUTPUT" ;;
+       3) chain="FORWARD" ;;
+       4) main;;
+       *) echo -e "Wrong Option Selected!!!"
+      esac
+     
+      #########Getting Source IP Address##########
+       
+      echo -e "
+      1. Firewall using Single Source IP
+      2. Firewall using Source Subnet
+      3. Firewall using for All Source Networks
+      4. Firewall choose a source file containing ip addesses
+      5. Go back to Main Menu"
+      read opt_ip_srource
+       
+      case $opt_ip_srource in
+       1) echo -e "\nPlease Enter the IP Address of the Source"
+       read ip_source ;;
+       2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)"
+       read ip_source ;;
+       3) ip_source="0/0" ;;
+       4) echo -e "\nPlease Enter the file name."
+       read ip_source ;;
+       5) main;;
+       #6) ip_source = "NULL" ;;
+       *) echo -e "Wrong Option Selected"
+      esac
+           ##############Chose interface###############
+      echo -e " \nDo you want to Configure a Network Interface or a Destination Networks?\n
+      1. Configure a Network Interface
+      2. Configure a Destination Networks Only
+      3. Go back to Main Menu"
+        read opt_int
+        case $opt_int in
+            1) echo -e "\nPlease Enter a Network Interface."
+            read interface ;;
+            2) interface="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+        esac  
+      if [ $opt_int == "2" ]; then
+      #########Getting Destination IP Address##########
+      echo -e "Please Enter the IP Address of the Destination\n
+      1. Firewall using Single Destination IP
+      2. Firewall using Destination Subnet
+      3. Firewall using for All Destination Networks
+      4. Go back to Main Menu"
+
+      read opt_ip_dest
+        case $opt_ip_dest in
+            1) echo -e "\nPlease Enter the IP Address of the Destination"
+            read ip_dest ;;
+            2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)"
+            read ip_dest ;;
+            3) ip_dest="0/0" ;;
+            4) main;;
+            *) echo -e "Wrong Option Selected"
+           esac
+		   
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+	
+     #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	else
+
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+             
+           #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	fi
+	
+###################Generating the Rule####################
+
+    function del_rule_single_ip()
+    {
+
+	if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=1
+		elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule"
+			gen=2
+		elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface --dport $port -j $rule"
+			gen=3
+		elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=4
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=5
+		elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule"
+			gen=6
+		elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest --dport $port -j $rule"
+			gen=7
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=8
+	fi
+
+	echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+	read yesno
+
+	if [ $yesno == 1 ] && [ $gen == 1 ]; then
+		$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+			$IPT -D $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+			$IPT -D $chain -s $ip_source -i $interface --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+			$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 2 ]; then
+		main
+	fi
+    }
+	
+    function del_rule_multiple_ip()
+    {
+    for ipdetails in `cat $ip_source`
+    do
+			if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+					gen=1
+				elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule"
+					gen=2
+				elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface --dport $port -j $rule"
+					gen=3
+				elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+					gen=4
+				elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+					gen=5
+				elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule"
+					gen=6
+				elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest --dport $port -j $rule"
+					gen=7
+				elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+					gen=8
+			fi
+	done
+	
+		echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+		read yesno
+	for ipdetails in `cat $ip_source`
+	do
+		if [ $yesno == 1 ] && [ $gen == 1 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+			elif [ $yesno == 2 ]; then
+			main
+		fi
+	done
+	}
+
+echo "$opt_ip_srource"
+echo -e "\n\tPress Enter key to Generate the Complete Rule!!!"
+read temp
+echo -e "The Generated Rule is \n"
+if [ $opt_ip_srource == "1" ] || [ $opt_ip_srource == "2" ] ; then
+    del_rule_single_ip  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+else
+    del_rule_multiple_ip  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+fi
+
+ }
+echo -e "\t**********************|Delete your Iptable Menu|***************************\n
+ 1. Delete a Custum Rule
+ 2. Delete one Rule
+ 3. Back to Main Menu"
+ 
+ read opt_delfirewall
+ case $opt_delfirewall in
+  1) delprogram ;;
+  2) deleteonerule  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log ;;
+  3) main ;;
+  *) echo -e "Wrong option Selected!!!"
+esac
+
+} 
+ 
+ 
+function main()
+{
+ ROOT_UID=0
+ if [ $UID == $ROOT_UID ];
+ then
+ clear
+ opt_main=1
+ while [ $opt_main != 6 ]
+ do
+echo -e "************************************************************************" 
+#############Check Whether the iptables installed or not############ 
+ echo -e "\t**********************|Main Menu|***************************\n
+ 1. Check Iptables Package\n
+ 2. Iptables Services\n
+ 3. Build Your Firewall with Iptables\n
+ 4. Delete Your Firewall with Iptables\n
+ 5. EDSN script\n
+ 6. Exit"
+ read opt_main
+ case $opt_main in
+  1) echo -e "******************************"
+    rpm -q iptables 
+     echo -e "******************************" ;;
+  2) checkstatus  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log ;;
+  3) buildfirewall ;;
+  4) delfirewall ;;
+  5) sh setIptables_config2.sh 2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log ;;
+  6) exit 0 ;;
+  *) echo -e "Wrong option Selected!!!"
+ esac
+done
+else
+ echo -e "You Must be the ROOT to Perfom this Task!!!"
+fi
+}
+main
+exit 0
\ No newline at end of file
diff --git a/scripts/IptablesTool2.sh b/scripts/IptablesTool2.sh
new file mode 100644
index 0000000..362bd2a
--- /dev/null
+++ b/scripts/IptablesTool2.sh
@@ -0,0 +1,743 @@
+#!/bin/bash
+#(c) Roy Cohen 23/11/2012    :roy@wondercohen.nl
+#original script             :http://www.howtoforge.com/bash-script-for-configuring-iptables-firewall
+#objective                   :IPtables administering tool
+#last update                 :29/11/2012
+#version                     :0.2
+
+
+# Parameters
+IPT="/sbin/iptables"
+IPTSAVE="/etc/init.d/iptables save"
+
+
+echo -e""
+###############################IPTABLE SERVICES PROGRAM BEGINS HERE###############################
+function checkstatus()
+ {
+  opt_checkstatus=1
+ while [ $opt_checkstatus != 7 ]
+      do
+       clear
+  #echo -e "\nChoose the Option Bellow!!!\n
+  echo -e "\n\t*****Note: Save your Iptables before stop/Restart the iptables Services*****\n"
+  echo -e "   1. Save the iptables\n
+   2. Status of Iptables\n
+   3. Start iptables Services\n
+   4. Stop iptables Services\n
+   5. Restart iptable Services\n
+   6. Flush iptables (**Use Carefully_it will remove all the rules from iptables**)\n
+   7. Go back to Main Menu"
+  read opt_checkstatus
+  case $opt_checkstatus in
+   1) echo -e "*******************************************************\n" 
+               /etc/init.d/iptables save 
+      echo -e "\n*******************************************************\n"
+    echo -e "Press Enter key to Continue..."
+    read temp;;
+   2) echo -e "*******************************************************\n"
+               /etc/init.d/iptables status 
+      echo -e "*******************************************************"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   3) echo -e "*******************************************************\n"  
+               /etc/init.d/iptables start 
+      echo -e "*******************************************************\n"
+                                 echo -e "Press Enter key to Continue..."
+                                       read temp;;
+   
+   4) echo -e "*******************************************************\n"
+               /etc/init.d/iptables stop
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+     
+             5) echo -e "*******************************************************\n"
+                      /etc/init.d/iptables restart 
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   6) iptables -F 
+   echo -e "*******************************************************"
+   echo -e "All the Rules from the Iptables are Flushed!!!"
+   echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                 read temp;;
+   7) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+ }
+###############################BUILD FIREWALL PROGRAM BEGINS FROM HERE############################### 
+function buildfirewall()
+ {
+   function buildfirewallprogram ()
+   {
+      ###############Getting the Chain############
+      clear
+      echo -e "Using Which Chain of Filter Table?\n
+      1. INPUT
+      2. OUTPUT
+      3. Forward
+      4. Go back to Main Menu"
+      read opt_ch
+      case $opt_ch in
+       1) chain="INPUT" ;;
+       2) chain="OUTPUT" ;;
+       3) chain="FORWARD" ;;
+       4) main;;
+       *) echo -e "Wrong Option Selected!!!"
+      esac
+ 
+
+      #########Getting Source IP Address##########
+      #Label
+       
+      echo -e "Please the Source IP Address\n
+      1. Firewall using Single Source IP
+      2. Firewall using Source Subnet
+      3. Firewall using for All Source Networks
+      4. Firewall choose a source file containing ip addesses
+      5. Go back to Main Menu"
+      read opt_ip_srource
+       
+      case $opt_ip_srource in
+       1) echo -e "\nPlease Enter the IP Address of the Source"
+       read ip_source ;;
+       2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)"
+       read ip_source ;;
+       3) ip_source="0/0" ;;
+       4) echo -e "\nPlease Enter the file name."
+       read ip_source ;;
+       5) main;;
+       #6) ip_source = "NULL" ;;
+       *) echo -e "Wrong Option Selected"
+      esac
+		
+      ##############Chose interface###############
+      echo -e " \nDo you want to Configure a Network Interface or a Destination Networks?\n
+      1. Configure a Network Interface
+      2. Configure a Destination Networks Only
+      3. Go back to Main Menu"
+        read opt_int
+        case $opt_int in
+            1) echo -e "\nPlease Enter a Network Interface."
+            read interface ;;
+            2) interface="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+        esac 
+	
+	if [ $opt_int == "2" ]; then
+      #########Getting Destination IP Address##########
+      echo -e "Please Enter the IP Address of the Destination\n
+      1. Firewall using Single Destination IP
+      2. Firewall using Destination Subnet
+      3. Firewall using for All Destination Networks
+      4. Go back to Main Menu"
+
+      read opt_ip_dest
+        case $opt_ip_dest in
+            1) echo -e "\nPlease Enter the IP Address of the Destination"
+            read ip_dest ;;
+            2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)"
+            read ip_dest ;;
+            3) ip_dest="0/0" ;;
+            4) main;;
+            *) echo -e "Wrong Option Selected"
+           esac
+		   
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+	
+     #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	else
+
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+             
+           #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	fi
+}
+###################Generating the Rule####################
+buildfirewallprogram
+
+function generate_rule_single_ip()
+{
+		if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=1
+		elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule"
+			gen=2
+		elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface --dport $port -j $rule"
+			gen=3
+		elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=4
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=5
+		elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule"
+			gen=6
+		elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest --dport $port -j $rule"
+			gen=7
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=8
+	fi
+
+echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+read yesno
+
+	if [ $yesno == 1 ] && [ $gen == 1 ]; then
+		$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+		$IPT -A $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+		$IPT -A $chain -s $ip_source -i $interface --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+		$IPT -A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest --dport $port -j $rule
+	elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+		$IPT -A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+	elif [ $yesno == 2 ]; then
+
+	main
+	fi
+	
+}
+
+function generate_rule_multiple_ip()
+{
+    for ipdetails in `cat $ip_source`
+    do
+		if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+			gen=1
+		elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule"
+			gen=2
+		elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface --dport $port -j $rule"
+			gen=3
+		elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+			gen=4
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=5
+		elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule"
+			gen=6
+		elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest --dport $port -j $rule"
+			gen=7
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=8
+		fi
+done
+
+echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+read yesno
+	for ipdetails in `cat $ip_source`
+	do
+		if [ $yesno == 1 ] && [ $gen == 1 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+			$IPT -A $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+			$IPT -A $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 2 ]; then
+		main
+		fi
+	done
+}
+
+echo -e "\n\tPress Enter key to Generate the Complete Rule!!!"
+read temp
+echo -e "The Generated Rule is \n"
+##CHOSE TO LOOP A FILE OR A SINGLE IP ADDRESS ###################################
+
+if [ $opt_ip_srource == "1" ] || [ $opt_ip_srource == "2" ] ; then
+    generate_rule_single_ip 2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+	echo -e "Press Enter key to Continue..."
+    read temp
+	main
+else
+    generate_rule_multiple_ip 2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+	echo -e "Press Enter key to Continue..."
+    read temp
+	main
+fi
+
+}
+
+##############################DELETE FIREWALL PROGRAM BEGINS FROM HERE############################### 
+function delfirewall()
+{
+    function deleteonerule () 
+    {
+	echo -e "
+      1. Delete one rule
+      2. Go back to Main Menu"
+      read opt_delete_one_rule
+
+      case $opt_delete_one_rule in
+       1) echo -e "\nPlease Eneter the Rule."
+       read one_rule ;;
+       2) main;;
+       *) echo -e "Wrong Option Selected"
+      esac
+    echo "$one_rule"| sed 's/-A/-D/g'
+    echo "Do you want to remove this rule, Yes=1 , No=2"
+    read yesno
+
+    if [ $yesno == 1 ] ; then
+    $IPT `echo $one_rule |  sed 's/-A/-D/g'`
+    else
+    main
+    fi
+    }  
+
+    function delprogram ()
+    {
+	###############Getting the Chain############
+      clear
+      echo -e "Using Which Chain of Filter Table?\n
+      1. INPUT
+      2. OUTPUT
+      3. Forward
+      4. Go back to Main Menu"
+      read opt_ch
+      case $opt_ch in
+       1) chain="INPUT" ;;
+       2) chain="OUTPUT" ;;
+       3) chain="FORWARD" ;;
+       4) main;;
+       *) echo -e "Wrong Option Selected!!!"
+      esac
+     
+      #########Getting Source IP Address##########
+       
+      echo -e "
+      1. Firewall using Single Source IP
+      2. Firewall using Source Subnet
+      3. Firewall using for All Source Networks
+      4. Firewall choose a source file containing ip addesses
+      5. Go back to Main Menu"
+      read opt_ip_srource
+       
+      case $opt_ip_srource in
+       1) echo -e "\nPlease Enter the IP Address of the Source"
+       read ip_source ;;
+       2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)"
+       read ip_source ;;
+       3) ip_source="0/0" ;;
+       4) echo -e "\nPlease Enter the file name."
+       read ip_source ;;
+       5) main;;
+       #6) ip_source = "NULL" ;;
+       *) echo -e "Wrong Option Selected"
+      esac
+           ##############Chose interface###############
+      echo -e " \nDo you want to Configure a Network Interface or a Destination Networks?\n
+      1. Configure a Network Interface
+      2. Configure a Destination Networks Only
+      3. Go back to Main Menu"
+        read opt_int
+        case $opt_int in
+            1) echo -e "\nPlease Enter a Network Interface."
+            read interface ;;
+            2) interface="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+        esac  
+      if [ $opt_int == "2" ]; then
+      #########Getting Destination IP Address##########
+      echo -e "Please Enter the IP Address of the Destination\n
+      1. Firewall using Single Destination IP
+      2. Firewall using Destination Subnet
+      3. Firewall using for All Destination Networks
+      4. Go back to Main Menu"
+
+      read opt_ip_dest
+        case $opt_ip_dest in
+            1) echo -e "\nPlease Enter the IP Address of the Destination"
+            read ip_dest ;;
+            2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)"
+            read ip_dest ;;
+            3) ip_dest="0/0" ;;
+            4) main;;
+            *) echo -e "Wrong Option Selected"
+           esac
+		   
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+	
+     #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	else
+
+      ###############Getting the Protocol#############
+      echo -e "
+      1. All Traffic of TCP
+      2. Specific TCP Service
+      3. Not using a specific Protocol
+      4. Go back to Main Menu"
+        read proto_ch
+           case $proto_ch in
+            1) proto=tcp ;;
+            2) echo -e "Enter the TCP Service Name:"
+           read proto ;;
+            3) proto="NULL" ;;
+            4) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+     ###############Getting the Destination Port#############
+      echo -e "\nConfigure the Destination Port\n
+      1. Specific Destination Port
+      2. No Destination Port
+      3. Go back to Main Menu"
+        read port_ch
+           case $port_ch in
+            1) echo -e "Enter the Destination Port:"
+           read port ;;
+            2) prot="NULL" ;;
+            3) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+             
+           #############What to do With Rule############# 
+      echo -e "\nWhat to do with Rule?
+      1. Accept the Packet
+      2. Reject the Packet
+      3. Drop the Packet
+      4. Create Log
+      5. Go back to Main Menu"
+           read rule_ch
+           case $rule_ch in 
+            1) rule="ACCEPT" ;;
+            2) rule="REJECT" ;;
+            3) rule="DROP" ;;
+            4) rule="LOG" ;;
+            5) main;;
+           esac
+	fi
+	
+###################Generating the Rule####################
+
+    function del_rule_single_ip()
+    {
+
+	if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=1
+		elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule"
+			gen=2
+		elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface --dport $port -j $rule"
+			gen=3
+		elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule"
+			gen=4
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=5
+		elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule"
+			gen=6
+		elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest --dport $port -j $rule"
+			gen=7
+		elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+			echo "$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule"
+			gen=8
+	fi
+
+	echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+	read yesno
+
+	if [ $yesno == 1 ] && [ $gen == 1 ]; then
+		$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+			$IPT -D $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+			$IPT -D $chain -s $ip_source -i $interface --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+			$IPT -D $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest --dport $port -j $rule
+		elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+			$IPT -D $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule
+		elif [ $yesno == 2 ]; then
+		main
+	fi
+    }
+	
+    function del_rule_multiple_ip()
+    {
+    for ipdetails in `cat $ip_source`
+    do
+			if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+					gen=1
+				elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule"
+					gen=2
+				elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface --dport $port -j $rule"
+					gen=3
+				elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule"
+					gen=4
+				elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+					gen=5
+				elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule"
+					gen=6
+				elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest --dport $port -j $rule"
+					gen=7
+				elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+					echo "$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule"
+					gen=8
+			fi
+	done
+	
+		echo -e "\n\tDo you want to Enter and Save the Above rule to the IPTABLES? Yes=1 , No=2"
+		read yesno
+	for ipdetails in `cat $ip_source`
+	do
+		if [ $yesno == 1 ] && [ $gen == 1 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 2 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface -p $proto --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 3 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 4 ]; then
+				$IPT -D $chain -s $ipdetails -i $interface -p tcp --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 5 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 6 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest -p $proto --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 7 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest --dport $port -j $rule
+			elif [ $yesno == 1 ] && [ $gen == 8 ]; then
+				$IPT -D $chain -s $ipdetails -d $ip_dest -p tcp --dport $port -j $rule
+			elif [ $yesno == 2 ]; then
+			main
+		fi
+	done
+	}
+
+echo "$opt_ip_srource"
+echo -e "\n\tPress Enter key to Generate the Complete Rule!!!"
+read temp
+echo -e "The Generated Rule is \n"
+if [ $opt_ip_srource == "1" ] || [ $opt_ip_srource == "2" ] ; then
+    del_rule_single_ip  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+else
+    del_rule_multiple_ip  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log
+	$IPTSAVE
+fi
+
+ }
+echo -e "\t**********************|Delete your Iptable Menu|***************************\n
+ 1. Delete a Custum Rule
+ 2. Delete one Rule
+ 3. Back to Main Menu"
+ 
+ read opt_delfirewall
+ case $opt_delfirewall in
+  1) delprogram ;;
+  2) deleteonerule  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log ;;
+  3) main ;;
+  *) echo -e "Wrong option Selected!!!"
+esac
+
+} 
+ 
+ 
+function main()
+{
+ ROOT_UID=0
+ if [ $UID == $ROOT_UID ];
+ then
+ clear
+ opt_main=1
+ while [ $opt_main != 6 ]
+ do
+echo -e "************************************************************************" 
+#############Check Whether the iptables installed or not############ 
+ echo -e "\t**********************|Main Menu|***************************\n
+ 1. Check Iptables Package\n
+ 2. Iptables Services\n
+ 3. Build Your Firewall with Iptables\n
+ 4. Delete Your Firewall with Iptables\n
+ 6. Exit"
+ read opt_main
+ case $opt_main in
+  1) echo -e "******************************"
+    rpm -q iptables 
+     echo -e "******************************" ;;
+  2) checkstatus  2>&1 | tee -a IpTab_$(date +%Y%m%d%H%M).log ;;
+  3) buildfirewall ;;
+  4) delfirewall ;;
+  6) exit 0 ;;
+  *) echo -e "Wrong option Selected!!!"
+ esac
+done
+else
+ echo -e "You Must be the ROOT to Perfom this Task!!!"
+fi
+}
+main
+exit 0
\ No newline at end of file
diff --git a/scripts/Loop_AddUser3.sh b/scripts/Loop_AddUser3.sh
new file mode 100644
index 0000000..755641c
--- /dev/null
+++ b/scripts/Loop_AddUser3.sh
@@ -0,0 +1,17 @@
+user1,password1
+user2,password2
+etc..
+
+The script:
+
+for userdetails in `cat /pathto//users.txt`
+do
+        user=`echo $userdetails | cut -f 1 -d ,`
+        passwd=`echo $userdetails | cut -f 2 -d ,`
+        echo "useradd -d /user1/kopen3 -p `mkpasswd $passwd` $user"
+done
+
+run the script and redirect the output to a file, e.g:
+
+./createusers.sh > userscript.sh
+chmod +x userscript.sh
diff --git a/scripts/adduser_schrpt.sh b/scripts/adduser_schrpt.sh
new file mode 100644
index 0000000..37442ba
--- /dev/null
+++ b/scripts/adduser_schrpt.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+
+if [ $# -lt 1 ]
+then
+  echo "Syntax: ./`basename $0` <file name>"
+  exit
+fi
+
+# Parameters
+USER_DATA_FILE=$1
+
+for userdetails in `cat $1`
+do
+      ENVIRONMENT_NAME=`echo $userdetails | cut -f 1 -d:`
+      ORGANIZARION_NUMBER=`echo $userdetails | cut -f 2 -d:`
+      PASSWD=`echo $userdetails | cut -f 3 -d:`
+	  USER_NAME=${ENVIRONMENT_NAME}_${ORGANIZARION_NUMBER}
+	  egrep "^$USER_NAME" /etc/passwd >/dev/null
+	
+	if [ $? -eq 0 ]; then
+		echo "$username exists!"
+		exit 1
+	else
+		ENCR_PASSWD=$(perl -e 'print crypt($ARGV[0], "password")' $PASSWD)
+		useradd -m -p $ENCR_PASSWD $USER_NAME
+		[ $? -eq 0 ] && echo "User has been added to system!" || echo "Failed to add a user!"
+	fi
+    else
+	echo "Only root may add a user to the system"
+	exit 2
+	
+done
+
+USER_NAME=${ENVIRONMENT_NAME}_${ORGANIZARION_NUMBER}
+
+
+#!/bin/bash
+# Script to add a user to Linux system
+if [ $(id -u) -eq 0 ]; then
+	read -p "Enter username : " username
+	read -s -p "Enter password : " password
+	egrep "^$username" /etc/passwd >/dev/null
+	if [ $? -eq 0 ]; then
+		echo "$username exists!"
+		exit 1
+	else
+		pass=$(perl -e 'print crypt($ARGV[0], "password")' $password)
+		useradd -m -p $pass $username
+		[ $? -eq 0 ] && echo "User has been added to system!" || echo "Failed to add a user!"
+	fi
+else
+	echo "Only root may add a user to the system"
+	exit 2
+fi
\ No newline at end of file
diff --git a/scripts/bashrc b/scripts/bashrc
new file mode 100644
index 0000000..81d623e
--- /dev/null
+++ b/scripts/bashrc
@@ -0,0 +1,97 @@
+# /etc/bashrc
+
+# System wide functions and aliases
+# Environment stuff goes in /etc/profile
+
+# It's NOT a good idea to change this file unless you know what you
+# are doing. It's much better to create a custom.sh shell script in
+# /etc/profile.d/ to make custom changes to your environment, as this
+# will prevent the need for merging in future updates.
+
+# are we an interactive shell?
+if [ "$PS1" ]; then
+  if [ -z "$PROMPT_COMMAND" ]; then
+    case $TERM in
+    xterm*|vte*)
+      if [ -e /etc/sysconfig/bash-prompt-xterm ]; then
+          PROMPT_COMMAND=/etc/sysconfig/bash-prompt-xterm
+      elif [ "${VTE_VERSION:-0}" -ge 3405 ]; then
+          PROMPT_COMMAND="__vte_prompt_command"
+      else
+          PROMPT_COMMAND='printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
+      fi
+      ;;
+    screen*)
+      if [ -e /etc/sysconfig/bash-prompt-screen ]; then
+          PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen
+      else
+          PROMPT_COMMAND='printf "\033k%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"'
+      fi
+      ;;
+    *)
+      [ -e /etc/sysconfig/bash-prompt-default ] && PROMPT_COMMAND=/etc/sysconfig/bash-prompt-default
+      ;;
+    esac
+  fi
+  # Turn on parallel history
+  shopt -s histappend
+  history -a
+  # Turn on checkwinsize
+  shopt -s checkwinsize
+  [ "$PS1" = "\\s-\\v\\\$ " ] && PS1="[\u@\h \W]\\$ "
+  # You might want to have e.g. tty in prompt (e.g. more virtual machines)
+  # and console windows
+  # If you want to do so, just add e.g.
+  # if [ "$PS1" ]; then
+  #   PS1="[\u@\h:\l \W]\\$ "
+  # fi
+  # to your custom modification shell script in /etc/profile.d/ directory
+fi
+
+if ! shopt -q login_shell ; then # We're not a login shell
+    # Need to redefine pathmunge, it get's undefined at the end of /etc/profile
+    pathmunge () {
+        case ":${PATH}:" in
+            *:"$1":*)
+                ;;
+            *)
+                if [ "$2" = "after" ] ; then
+                    PATH=$PATH:$1
+                else
+                    PATH=$1:$PATH
+                fi
+        esac
+    }
+
+    # By default, we want umask to get set. This sets it for non-login shell.
+    # Current threshold for system reserved uid/gids is 200
+    # You could check uidgid reservation validity in
+    # /usr/share/doc/setup-*/uidgid file
+    if [ $UID -gt 199 ] && [ "`/usr/bin/id -gn`" = "`/usr/bin/id -un`" ]; then
+       umask 002
+    else
+       umask 022
+    fi
+
+    SHELL=/bin/bash
+    # Only display echos from profile.d scripts if we are no login shell
+    # and interactive - otherwise just process them to set envvars
+    for i in /etc/profile.d/*.sh; do
+        if [ -r "$i" ]; then
+            if [ "$PS1" ]; then
+                . "$i"
+            else
+                . "$i" >/dev/null
+            fi
+        fi
+    done
+
+    unset i
+    unset -f pathmunge
+fi
+# vim:ts=4:sw=4
+# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
+HISTSIZE=10000
+HISTFILESIZE=20000
+HISTTIMEFORMAT=${HISTTIMEFORMAT:-%F %H:%M:%S }
+
diff --git a/scripts/bashrc.hv b/scripts/bashrc.hv
new file mode 100644
index 0000000..a4f9231
--- /dev/null
+++ b/scripts/bashrc.hv
@@ -0,0 +1,54 @@
+# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
+HISTSIZE=10000
+HISTFILESIZE=20000
+HISTTIMEFORMAT=${HISTTIMEFORMAT:-%F %H:%M:%S }
+
+
+USER=`whoami`
+HOSTNAME=`uname -n`
+
+MEMORY1=`free -t -m | grep "buffers/cache" | awk '{print $3" MB";}'`
+MEMORY2=`free -t -m | grep "Mem" | awk '{print $2" MB";}'`
+PSA=`ps -Afl | wc -l`
+
+# time of day
+DATE=$(date +"%F %H:%M:%S")
+
+#System uptime
+uptime=`cat /proc/uptime | cut -f1 -d.`
+upDays=$((uptime/60/60/24))
+upHours=$((uptime/60/60%24))
+upMins=$((uptime/60%60))
+upSecs=$((uptime%60))
+
+#System load
+LOAD1=`cat /proc/loadavg | awk {'print $1'}`
+LOAD5=`cat /proc/loadavg | awk {'print $2'}`
+LOAD15=`cat /proc/loadavg | awk {'print $3'}`
+
+#Host engine
+ENGINE=$(hosted-engine --vm-status|grep "Engine status")
+
+
+
+
+echo "
+ - Current time........: $DATE
+ - Current user........: $USER
+ - Hostname............: $HOSTNAME
+ - Release.............: `cat /etc/redhat-release`
+ - Users...............: Currently `users | wc -w` user(s) logged on
+ - CPU usage...........: $LOAD1, $LOAD5, $LOAD15 (1, 5, 15 min)
+ - Memory used.........: $MEMORY1 / $MEMORY2
+ - Swap in use.........: `free -m | tail -n 1 | awk '{print $3}'` MB
+ - Processes...........: $PSA running
+ - System uptime.......: $upDays days $upHours hours $upMins minutes $upSecs seconds
+ - Host engine status..:
+$ENGINE
+==================================== volume status vm ===============================
+$(gluster volume status vm clients|grep 'Brick\|Clients')
+
+==================================== volume status engine ===========================
+$(gluster volume status engine clients|grep 'Brick\|Clients')
+"
+
diff --git a/scripts/command_loop.sh b/scripts/command_loop.sh
new file mode 100644
index 0000000..153c0cc
--- /dev/null
+++ b/scripts/command_loop.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+
+FILE=$1
+
+if [ $# -lt 1 ]
+then
+	echo "Syntax: ./$(basename $0) <file name>"
+  exit
+fi
+
+for host in $(cut -d ":" -f2  ${FILE})
+do
+	whois $host
+
+#ssh -n root@$host "vgdisplay"
+
+done
diff --git a/scripts/count_ip.sh b/scripts/count_ip.sh
new file mode 100644
index 0000000..c31ad66
--- /dev/null
+++ b/scripts/count_ip.sh
@@ -0,0 +1,12 @@
+#!/bin/bash
+FILE=;
+
+for ip in $(tail -n 5000 $FILE |cut -d ' ' -f 1 |sort |uniq);
+do
+    {
+    COUNT=$(grep ^$ip $FILE |wc -l);
+    if 
+       [[ "$COUNT" -gt "500" ]]; then echo "$COUNT:   $ip";
+    fi
+    };
+done
diff --git a/scripts/git_prompt_func b/scripts/git_prompt_func
new file mode 100644
index 0000000..9baec99
--- /dev/null
+++ b/scripts/git_prompt_func
@@ -0,0 +1,55 @@
+#https://gist.github.com/halbtuerke/31934
+#parse_git_branch() {
+#     git branch 2> /dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/ (\1)/'
+#}
+#export PS1="\u@\h \[\033[32m\]\w\[\033[33m\]\$(parse_git_branch)\[\033[00m\] $ "
+        RED="\[\033[0;31m\]"
+     YELLOW="\[\033[0;33m\]"
+          GREEN="\[\033[0;32m\]"
+       BLUE="\[\033[0;34m\]"
+  LIGHT_RED="\[\033[1;31m\]"
+LIGHT_GREEN="\[\033[1;32m\]"
+      WHITE="\[\033[1;37m\]"
+ LIGHT_GRAY="\[\033[0;37m\]"
+ COLOR_NONE="\[\e[0m\]"
+
+function parse_git_branch {
+
+  git rev-parse --git-dir &> /dev/null
+  git_status="$(git status 2> /dev/null)"
+  branch_pattern="^# On branch ([^${IFS}]*)"
+  remote_pattern="# Your branch is (.*) of"
+  diverge_pattern="# Your branch and (.*) have diverged"
+  if [[ ! ${git_status}} =~ "working directory clean" ]]; then
+    state="${RED}⚡"
+  fi
+  # add an else if or two here if you want to get more specific
+  if [[ ${git_status} =~ ${remote_pattern} ]]; then
+    if [[ ${BASH_REMATCH[1]} == "ahead" ]]; then
+      remote="${YELLOW}↑"
+    else
+      remote="${YELLOW}↓"
+    fi
+  fi
+  if [[ ${git_status} =~ ${diverge_pattern} ]]; then
+    remote="${YELLOW}↕"
+  fi
+  if [[ ${git_status} =~ ${branch_pattern} ]]; then
+    branch=${BASH_REMATCH[1]}
+    echo " (${branch})${remote}${state}"
+  fi
+}
+
+function prompt_func() {
+    previous_return_value=$?;
+    # prompt="${TITLEBAR}$BLUE[$RED\w$GREEN$(__git_ps1)$YELLOW$(git_dirty_flag)$BLUE]$COLOR_NONE"
+    prompt="\u@\h \[\033[32m\]\${TITLEBAR}${BLUE}[${LIGHT_GRAY}\w${GREEN}$(parse_git_branch)${BLUE}]${COLOR_NONE}"
+    if test $previous_return_value -eq 0
+    then
+        PS1="${prompt}# "
+    else
+        PS1="${prompt}${RED}#${COLOR_NONE} "
+    fi
+}
+
+PROMPT_COMMAND=prompt_func
\ No newline at end of file
diff --git a/scripts/gluster_check.sh b/scripts/gluster_check.sh
new file mode 100644
index 0000000..471ce18
--- /dev/null
+++ b/scripts/gluster_check.sh
@@ -0,0 +1,92 @@
+#!/bin/bash
+#Roy Cohen 					:roy@wondercohen.nl
+#objective					:Gluster checks for Nagios
+#First line of code			:15/01/2019
+#last update				:17/01/2019
+#version					:0.1
+#status						:Not PRD ready
+
+#Some general vars
+#Server IP adress in the storage network TODO: osg servers
+STORAGE_IP=$(ip -4 addr show dev storage | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
+#number of active bricks on server acourding to gluster
+NUMBER_OF_ACTIVE_BRICKS=$(gluster volume info|grep $STORAGE_IP| wc -l)
+#name of active volumes on server acourding to gluster
+GLUSTER_ACTIVE_VOLUM_NAMES=$(gluster volume info|grep $STORAGE_IP | cut -d "/" -f3)
+#numer of glusterfsd (brick daemon) running processes
+GLUSTER_BRICK_NUMBER_PID=$(pidof glusterfsd |wc -w)
+#glusterd pid status
+GLUSTERD_STAT=$(pidof glusterd &>/dev/null)
+#glusterfsd (brick daemon) pid status
+GLUSTER_BRICK_STAT=$(pidof glusterfsd &>/dev/null)
+
+######START OF SCRIPT#######
+
+check_if_glusterd_is_running() {
+#check if glusterd is running
+if ! $GLUSTERD_STAT &>/dev/null; then
+                echo "CRITICAL: glusterd management daemon not running"
+        else
+                echo "OK: glusterd management daemon is running"
+fi
+}
+
+check_if_glusterfsd_is_running() {
+# check for glusterfsd (brick daemon)
+if ! $GLUSTER_BRICK_STAT; then
+                echo "CRITICAL: glusterfsd brick daemon not running"
+        else
+                echo "OK: glusterfsd brick daemon is running"
+fi
+}
+
+check_if_a_brick_is_down() {
+# check number of active bricks
+if  [ "$NUMBER_OF_ACTIVE_BRICKS" == "$GLUSTER_BRICK_NUMBER_PID" ] ; then
+                echo "OK: all bricks are active"
+        else
+                echo "CRITICAL: There is one or more bricks down"
+fi
+}
+
+check_heal_status_of_a_volume() {
+# get volume heal status and redirect it to a tmp file
+for volume in $(gluster volume info|grep $STORAGE_IP | cut -d "/" -f3)
+do
+	echo "volumes, $volume" 
+	gluster v heal $volume info |grep entries|cut -d ":" -f2
+done >  /tmp/gluster_monitoring 
+
+OUT=$(cat /tmp/gluster_monitoring|grep -v volumes |sed "s/^[ \t]*//" |grep -v ^0 > /dev/null 2>&1)
+if [ "$?" -eq 0 ]; then
+		echo "WARNING:  volumes healing at this moment $(cat /tmp/gluster_monitoring |sed "s/^[ \t]*//" | grep -v ^0)"
+	else
+		echo "OK: no volumes healing at this moment"
+fi
+echo "" > /tmp/gluster_monitoring
+}
+
+
+
+#### CALL THE FUNCTIONS ######
+check_if_glusterd_is_running
+check_if_glusterfsd_is_running
+check_if_a_brick_is_down
+check_heal_status_of_a_volume
+
+
+# some logs test
+#cat /var/log/glusterfs/glusterd.log|grep "E" |grep "failed"
+#  oc rsh -n glusterfs $(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1) gluster volume status all
+
+if []
+
+
+
+OUT=$(cat /tmp/gluster_monitoring|grep -v volumes |sed "s/^[ \t]*//" |grep -v ^0 > /dev/null 2>&1)
+if [ "$?" -eq 0 ]; then
+                echo "WARNING:  volumes healing at this moment $(cat /tmp/gluster_monitoring |sed "s/^[ \t]*//" | grep -v ^0)"
+        else
+                echo "OK: no volumes healing at this moment"
+fi
+echo "" > /tmp/gluster_monitoring
diff --git a/scripts/gluster_checks/check_gluster_bricks.sh b/scripts/gluster_checks/check_gluster_bricks.sh
new file mode 100644
index 0000000..61b998c
--- /dev/null
+++ b/scripts/gluster_checks/check_gluster_bricks.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :Gluster check bricks for Nagios
+#First line of code                             :15/01/2019
+#last update                                    :28/01/2019
+#version                                        :1.1
+
+######START OF SCRIPT#######
+IP_OF_DOWN_BRICK=$(cat /tmp/brick_status |grep  -v "Self-heal" | grep -E 'Brick|N/A|N' |grep -v "Y"| grep -B1 "N/A" | grep Brick| uniq | cut -d ":" -f1| cut -d " " -f2)
+NUMBER_OF_DOWN_BRICKS=$(cat /tmp/brick_status |grep  -v "Self-heal" | grep -E 'Brick|N'|grep "N/A"| awk '{print $4}'|grep N |wc -l)
+
+if [[ $(find /tmp -name "brick_status" -mmin +4 -print) ]]; then
+        echo "WARNING: there was an error during the gluster birck check. please check the output of /root/scripts/check_gluster.sh or the nrpe status"
+        exit 1
+# check number of active bricks
+elif  [ "$NUMBER_OF_DOWN_BRICKS" -eq 0 ] ; then
+                echo "OK: All bricks on are up"                
+                exit 0
+        else
+                echo "CRITICAL: There are one or more bricks down on $IP_OF_DOWN_BRICK"
+                exit 2
+
+fi
diff --git a/scripts/gluster_checks/check_gluster_cron.sh b/scripts/gluster_checks/check_gluster_cron.sh
new file mode 100644
index 0000000..89203ba
--- /dev/null
+++ b/scripts/gluster_checks/check_gluster_cron.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :igenerate Gluster output for Nagios checks
+#First line of code                             :15/01/2019
+#last update                                    :28/01/2019
+#version                                        :1.1
+#info:
+#This script needs to be added to cron and run every 3 min
+#Some general vars
+STORAGE_IP=$(ip -4 addr show dev storage | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
+
+######START OF SCRIPT#######
+
+#check status of the varous volumes
+/usr/sbin/gluster volume status all > /tmp/brick_status
+#check peer status
+/usr/sbin/gluster peer status > /tmp/peer_status
+
+# get volume heal status and redirect it to a tmp file
+for volume in $(/usr/sbin/gluster volume info|grep $STORAGE_IP | cut -d "/" -f3)
+do
+        echo "volume, $volume" 
+        /usr/sbin/gluster v heal $volume info |grep entries|cut -d ":" -f2
+done >  /tmp/gluster_monitoring_heal
\ No newline at end of file
diff --git a/scripts/gluster_checks/check_gluster_heal.sh b/scripts/gluster_checks/check_gluster_heal.sh
new file mode 100644
index 0000000..a22d42e
--- /dev/null
+++ b/scripts/gluster_checks/check_gluster_heal.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+#Roy Cohen 					:roy@wondercohen.nl
+#objective					:Gluster check heal for Nagios
+#First line of code				:15/01/2019
+#last update					:23/01/2019
+#version					:1.0
+
+######START OF SCRIPT#######
+OUT=$(cat /tmp/gluster_monitoring_heal 2>/dev/null |grep -a -v volume |sed "s/^[ \t]*//"| grep -a -v ^0 > /dev/null 2>&1 )
+EXIT_CODE=$?
+if [ -f /tmp/gluster_monitoring_heal ]; then
+	if [[ $(find /tmp -name "gluster_monitoring_heal" -mmin +4 -print) ]]; then
+        	echo "WARNING: there was an error during the gluster heal check. please check the output of /root/scripts/check_gluster.sh or the nrpe status"
+        	exit 1
+	elif [ "$EXIT_CODE" -eq 0 ]; then
+                echo -e "WARNING: volumes healing at this moment\n$(cat /tmp/gluster_monitoring_heal |sed "s/^[ \t]*//" | grep  -a -v ^0)" && rm -f /tmp/gluster_monitoring_heal
+                exit 1
+        else
+                echo "OK: no volumes healing at this moment" && rm -f /tmp/gluster_monitoring_heal
+                exit 0
+fi
+else
+	echo "WARNING: there was an error during the gluster heal check please check /tmp/gluster_monitoring_heal"
+	exit 1
+fi
diff --git a/scripts/gluster_checks/check_gluster_peer.sh b/scripts/gluster_checks/check_gluster_peer.sh
new file mode 100644
index 0000000..90ebde0
--- /dev/null
+++ b/scripts/gluster_checks/check_gluster_peer.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :Gluster check peer for Nagios
+#First line of code                             :15/01/2019
+#last update                                    :31/01/2019
+#version                                        :1.0
+
+######START OF SCRIPT#######
+SATE_OF_DOWN_PEER=$(cat /tmp/peer_status | grep -a Disconnected | wc -l)
+IP_OF_DOWN_PEER=$(cat /tmp/peer_status| grep -a -E "Hostname|Disconnected"| grep -a -B1 Disconnected | grep -a Hostname | cut -d ":" -f2| sed "s/^[ \t]*//")
+
+if [[ $(find /tmp -name "peer_status" -mmin +4 -print) ]]; then
+        echo "WARNING: there was an error during the gluster peer check. please check the output of /root/scripts/check_gluster.sh or the nrpe status"
+        exit 1
+# check number of active bricks
+elif  [ "$SATE_OF_DOWN_PEER" -eq 0 ] ; then
+                echo "OK: All bricks on are up"                
+                exit 0
+        else
+                echo "CRITICAL: There are one or more peers down on $IP_OF_DOWN_PEER"
+                exit 2
+
+fi
\ No newline at end of file
diff --git a/scripts/gluster_checks/check_gluster_pod.sh b/scripts/gluster_checks/check_gluster_pod.sh
new file mode 100644
index 0000000..12ff7f1
--- /dev/null
+++ b/scripts/gluster_checks/check_gluster_pod.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :Gluster check from within a pod server heal for Nagios
+#First line of code                             :15/01/2019
+#last update                                    :24/01/2019
+#version                                        :1.0
+
+######START OF SCRIPT#######
+gluster volume status all > /brick_status
+
+for volume in $(gluster volume info all | grep "Volume Name:"| cut -d ":" -f2)
+do
+        echo "volume, $volume" 
+        gluster v heal $volume info |grep entries|cut -d ":" -f2
+done > /gluster_monitoring_heal
\ No newline at end of file
diff --git a/scripts/gluster_checks/check_glusterd.sh b/scripts/gluster_checks/check_glusterd.sh
new file mode 100644
index 0000000..3bbf2fc
--- /dev/null
+++ b/scripts/gluster_checks/check_glusterd.sh
@@ -0,0 +1,41 @@
+#!/bin/bash
+#Roy Cohen 					:roy@wondercohen.nl
+#objective					:Check Gluster deamon state for Nagios
+#First line of code			:15/01/2019
+#last update				:17/01/2019
+#version					:1.0
+
+#Some general vars
+#glusterd pid status
+GLUSTERD_STAT=$(pidof glusterd &>/dev/null)
+#glusterfsd (brick daemon) pid status
+GLUSTER_BRICK_STAT=$(pidof glusterfsd &>/dev/null)
+
+
+######START OF SCRIPT#######
+
+check_if_glusterd_is_running() {
+#check if glusterd is running
+if ! $GLUSTERD_STAT &>/dev/null; then
+                echo "CRITICAL: glusterd management daemon not running"
+                exit 2
+        else
+                echo "OK: glusterd management daemon is running"
+                exit 0
+fi
+}
+
+check_if_glusterfsd_is_running() {
+# check for glusterfsd (brick daemon)
+if ! $GLUSTER_BRICK_STAT; then
+                echo "CRITICAL: glusterfsd brick daemon not running"
+                exit 2
+        else
+                echo "OK: glusterfsd brick daemon is running"
+                exit 0
+fi
+}
+
+#### CALL THE FUNCTIONS ######
+check_if_glusterd_is_running
+check_if_glusterfsd_is_running
\ No newline at end of file
diff --git a/scripts/gluster_checks/copy_gluster_check_to_pod.sh b/scripts/gluster_checks/copy_gluster_check_to_pod.sh
new file mode 100644
index 0000000..4849853
--- /dev/null
+++ b/scripts/gluster_checks/copy_gluster_check_to_pod.sh
@@ -0,0 +1,12 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :Copy check script to gluster pod for Nagios
+#First line of code                             :15/01/2019
+#last update                                    :31/01/2019
+#version                                        :1.1
+
+######START OF SCRIPT#######
+POD=$(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1)
+cd /root/scripts/
+oc cp check_gluster_pod.sh glusterfs/$POD:/
+oc exec -n glusterfs $POD /check_gluster_pod.sh && oc cp glusterfs/$POD:gluster_monitoring_heal /tmp && oc cp glusterfs/$POD:brick_status /tmp && oc cp glusterfs/$POD:brick_peer /tmp
\ No newline at end of file
diff --git a/scripts/gluster_checks/pod_loop_gluster_heal_status.sh b/scripts/gluster_checks/pod_loop_gluster_heal_status.sh
new file mode 100644
index 0000000..9094461
--- /dev/null
+++ b/scripts/gluster_checks/pod_loop_gluster_heal_status.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :Gluster heal status volume check in a pod 
+#First line of code                             :15/01/2019
+#last update                                    :31/01/2019
+#version                                        :1.2
+#info:
+#This script needs to be added to cron and run every 3 min
+#Some general vars
+STORAGE_IP=$(ip -4 addr show eth0 | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
+
+######START OF SCRIPT#######
+
+
+# get volume heal status and redirect it to a tmp file
+for volume in $(/usr/sbin/gluster volume info|grep "Volume Name:" | cut -d ":" -f2)
+do
+        echo "volume, $volume"
+        /usr/sbin/gluster v heal $volume info|grep "Status:"| grep "not connected"
+done
diff --git a/scripts/gluster_checks/some_check_gluster_openshift.sh b/scripts/gluster_checks/some_check_gluster_openshift.sh
new file mode 100644
index 0000000..bbc33de
--- /dev/null
+++ b/scripts/gluster_checks/some_check_gluster_openshift.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@wondercohen.nl
+#objective                                      :Gluster check OSM server heal for Nagios
+#First line of code                             :15/01/2019
+#last update                                    :24/01/2019
+#version                                        :1.0
+
+######START OF SCRIPT#######
+#gluster volume info all | grep "Volume Name:"| cut -d ":" -f2 > /tmp/volume_names
+
+
+
+for volume in $(gluster volume info all | grep "Volume Name:"| cut -d ":" -f2)
+do
+        echo "volume, $volume" 
+        gluster v heal $volume info |grep entries|cut -d ":" -f2
+done
+
+
+
+#for volume in $(cat /tmp/volume_names)
+#do
+#        OC="oc rsh -n"
+#        POD=$(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1)
+#        VAR1="gluster v heal $volume info |grep entries|cut -d: -f 2"
+        #echo "volume, $volume" 
+#        oc rsh -n glusterfs $POD | $VAR1
+#done 
+ oc rsh -n glusterfs  $(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1) gluster volume status all
+ oc rsh -n glusterfs $(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1)  ip -4 addr show 
+ 
+POD=$(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1)
+oc rsh -n glusterfs $POD gluster volume info all | grep "Volume Name:"| cut -d ":" -f2 > /tmp/volume_names
+
+
+for volume in $(cat /tmp/volume_names)
+do
+        OC="oc rsh -n"
+        POD=$(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1)
+        VAR1="gluster v heal $volume info |grep entries|cut -d: -f 2"
+        echo "volume, $volume" 
+        echo "$OC glusterfs $POD $VAR1"
+done 
+
+
+ /tmp/gluster_monitoring_heal
+
+
+oc rsh -n glusterfs $(oc get pods -n glusterfs | grep Running | grep 'glusterfs-storage' | head -n 1 | cut -d' ' -f1) gluster v heal vol_fa562e2cd81f137ccb455633829be163 info|grep entries|cut -d ":" -f2
+
+oc rsh -n glusterfs glusterfs-storage-4jq8n gluster v heal vol_fa562e2cd81f137ccb455633829be163 info|grep entries|cut -d ":" -f2
+
+
+oc cp /tmp/database.sql mysql:/tmp/
+
+kubectl cp <some-namespace>/<some-pod>:/tmp/foo /tmp/bar
+
+oc cp glusterfs/glusterfs-storage-4jq8n:gluster_monitoring_heal /tmp
\ No newline at end of file
diff --git a/scripts/host_ssh_test.sh b/scripts/host_ssh_test.sh
new file mode 100644
index 0000000..42bfcbf
--- /dev/null
+++ b/scripts/host_ssh_test.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+FILE=$1
+
+if [ $# -lt 1 ]
+then
+  echo "Syntax: ./`basename $0` <file name>"
+  exit
+fi
+
+
+for host in $(cat ${FILE})
+do
+
+#ssh -n admroy@$host "rm -rf /tmp/atlas/ && sh /root/atlas.sh init && /tmp/atlas/atlas.sh build && /tmp/atlas/atlas.sh purge && /tmp/atlas/atlas.sh install && hostname"
+#ssh -n root@$host "ps -ef |grep vmtoolsd && hostname "
+#ssh -n root@$host "hostname"
+
+done
diff --git a/scripts/iptables1.sh b/scripts/iptables1.sh
new file mode 100644
index 0000000..9731668
--- /dev/null
+++ b/scripts/iptables1.sh
@@ -0,0 +1,61 @@
+#!/bin/bash
+# Modify script as per your setup
+# Usage: Sample firewall script
+# ---------------------------
+_input=/root/firewall/badips.db
+_pub_if="eth1"
+IPT=/sbin/iptables
+ 
+# Die if file not found
+[ ! -f "$_input" ] && { echo "$0: File $_input not found."; exit 1; }
+ 
+# DROP and close everything
+$IPT -P INPUT DROP
+$IPT -P OUTPUT DROP
+$IPT -P FORWARD DROP
+ 
+# Unlimited lo access
+$IPT -A INPUT -i lo -j ACCEPT
+$IPT -A OUTPUT -o lo -j ACCEPT
+ 
+# Allow all outgoing connection but no incoming stuff by default
+$IPT -A OUTPUT -o ${_pub_if} -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
+$IPT -A INPUT -i ${_pub_if} -m state --state ESTABLISHED,RELATED -j ACCEPT
+ 
+ 
+### Setup our black list ###
+# Create a new chain 
+$IPT -N droplist
+ 
+# Filter out comments and blank lines
+# store each ip or subnet in $ip
+egrep -v "^#|^$" x | while IFS= read -r ip
+do
+        # Append everything to droplist
+	$IPT -A droplist -i ${_pub_if} -s $ip -j LOG --log-prefix " Drop Bad IP List "
+	$IPT -A droplist -i ${_pub_if} -s $ip -j DROP
+done <"${_input}"
+ 
+# Finally, insert or append our black list 
+$IPT -I INPUT -j droplist
+$IPT -I OUTPUT -j droplist
+$IPT -I FORWARD -j droplist
+ 
+ 
+# Okay add your rest of $IPT commands here 
+# Example: open port 53
+#$IPT -A INPUT -i ${_pub_if} -s 0/0 -d 1.2.3.4 -p udp --dport 53 -j ACCEPT
+#$IPT -A INPUT -i ${_pub_if} -s 0/0 -d 1.2.3.4 -p tcp --dport 53 -j ACCEPT
+ 
+# Open port 80
+# $IPT -A INPUT -i ${_pub_if} -s 0/0 -d 1.2.3.4 -p tcp --destination-port 80  -j ACCEPT
+ 
+# Allow incoming ICMP ping pong stuff
+# $IPT -A INPUT -i ${_pub_if} -p icmp --icmp-type 8 -m state --state NEW,ESTABLISHED,RELATED -m limit --limit 30/sec  -j ACCEPT
+# $IPT -A INPUT -i ${_pub_if}  -p icmp -m icmp --icmp-type 3 -m limit --limit 30/sec -j ACCEPT
+# $IPT -A INPUT -i ${_pub_if}  -p icmp -m icmp --icmp-type 5 -m limit --limit 30/sec -j ACCEPT
+# $IPT -A INPUT -i ${_pub_if}  -p icmp -m icmp --icmp-type 11 -m limit --limit 30/sec -j ACCEPT
+ 
+# drop and log everything else
+$IPT -A INPUT -m limit --limit 5/m --limit-burst 7 -j LOG
+$IPT -A INPUT -j DROP
\ No newline at end of file
diff --git a/scripts/iptables2.sh b/scripts/iptables2.sh
new file mode 100644
index 0000000..7284024
--- /dev/null
+++ b/scripts/iptables2.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# syntax of user list file 
+# sourceIPAdress:DestinationIPAddress:Port
+
+
+if [ $# -lt 1 ]
+then
+  echo "Syntax: ./`basename $0` <file name>"
+  exit
+fi
+
+# Parameters
+USER_DATA_FILE=$1
+
+
+_input=/path/to/text.db
+IPT=/sbin/iptables
+$IPT -N droplist
+egrep -v "^#|^$" x | while IFS= read -r ip
+do
+	$IPT -A droplist -i eth1 -s $ip -j LOG --log-prefix " myBad IP BlockList  "
+	$IPT -A droplist -i eth1 -s $ip -j DROP
+done < "$_input"
+# Drop it 
+$IPT -I INPUT -j droplist
+$IPT -I OUTPUT -j droplist
+$IPT -I FORWARD -j droplist
\ No newline at end of file
diff --git a/scripts/iptables_Roy.sh b/scripts/iptables_Roy.sh
new file mode 100644
index 0000000..e7a424a
--- /dev/null
+++ b/scripts/iptables_Roy.sh
@@ -0,0 +1,209 @@
+#!/bin/bash
+
+
+echo -e "****************Welcome*************"
+###############################IPTABLE SERVICES PROGRAM BEGINS HERE###############################
+checkstatus()
+ {
+  opt_checkstatus=1
+ while [ $opt_checkstatus != 7 ]
+      do
+       clear
+  #echo -e "\nChoose the Option Bellow!!!\n
+  echo -e "\n\t*****Note: Save your Iptables before stop/Restart the iptables Services*****\n"
+  echo -e "   1. Save the iptables\n
+   2. Status of Iptables\n
+   3. Start iptables Services\n
+   4. Stop iptables Services\n
+   5. Restart iptable Services\n
+   6. Flush iptables (**Use Carefully_it will remove all the rules from iptables**)\n
+   7. Go back to Main Menu"
+  read opt_checkstatus
+  case $opt_checkstatus in
+   1) echo -e "*******************************************************\n" 
+               /etc/init.d/iptables save 
+      echo -e "\n*******************************************************\n"
+    echo -e "Press Enter key to Continue..."
+    read temp;;
+   2) echo -e "*******************************************************\n"
+               /etc/init.d/iptables status 
+      echo -e "*******************************************************"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   3) echo -e "*******************************************************\n"  
+               /etc/init.d/iptables start 
+      echo -e "*******************************************************\n"
+                                 echo -e "Press Enter key to Continue..."
+                                       read temp;;
+   
+   4) echo -e "*******************************************************\n"
+               /etc/init.d/iptables stop
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+     
+             5) echo -e "*******************************************************\n"
+                      /etc/init.d/iptables restart 
+      echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                     read temp;;
+   6) iptables -F 
+   echo -e "*******************************************************"
+   echo -e "All the Rules from the Iptables are Flushed!!!"
+   echo -e "*******************************************************\n"
+                                echo -e "Press Enter key to Continue..."
+                                 read temp;;
+   7) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+ }
+###############################BUILD FIREWALL PROGRAM BEGINS FROM HERE############################### 
+buildfirewall()
+ {
+  ###############Getting the Chain############
+  echo -e "Using Which Chain of Filter Table?\n
+  1. INPUT
+  2. OUTPUT
+  3. Forward"
+  read opt_ch
+  case $opt_ch in
+   1) chain="INPUT" ;;
+   2) chain="OUTPUT" ;;
+   3) chain="FORWARD" ;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ 
+  #########Getting Source IP Address##########
+  #Label
+   
+  echo -e "
+  1. Firewall using Single Source IP\n
+  2. Firewall using Source Subnet\n
+  3. Firewall using for All Source Networks\n
+  4. Firewall choose a source file contationing ip addesses"
+  read opt_ip
+   
+  case $opt_ip in
+   1) echo -e "\nPlease Enter the IP Address of the Source"
+   read ip_source ;;
+   2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)"
+   read ip_source ;;
+   3) ip_source="0/0" ;;
+   4) echo -e "\nPlease Enter the file name."
+   read ip_source ;;
+   
+   #5) ip_source = "NULL" ;;
+   *) echo -e "Wrong Option Selected"
+  esac
+  #########Getting Destination IP Address##########
+   echo -e "
+  1. Firewall using Single Destination IP\n
+  2. Firewall using Destination Subnet\n
+  3. Firewall using for All Destination Networks\n
+  4. Firewall using a file"
+
+  read opt_ip
+              case $opt_ip in
+        1) echo -e "\nPlease Enter the IP Address of the Destination"
+                     read ip_dest ;;
+        2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)"
+                     read ip_dest ;;
+        3) ip_dest="0/0" ;;
+		4) echo -e "\nPlease Enter the file name."
+        read ip_dest ;;
+		#5) ip_dest = "NULL" ;;
+               *) echo -e "Wrong Option Selected"
+       esac
+       ###############Getting the Protocol#############
+       echo -e "
+       1. All Traffic of TCP
+       2. Specific TCP Service
+       3. Specific Port
+       4. Using no Protocol"
+       read proto_ch
+       case $proto_ch in
+        1) proto=TCP ;;
+        2) echo -e "Enter the TCP Service Name: (CAPITAL LETTERS!!!)"
+       read proto ;;
+        3) echo -e "Enter the Port Name: (CAPITAL LETTERS!!!)" 
+       read proto ;;
+        4) proto="NULL" ;;
+        *) echo -e "Wrong option Selected!!!"
+       esac
+ 
+       #############What to do With Rule############# 
+       echo -e "What to do with Rule?
+       1. Accept the Packet
+       2. Reject the Packet
+       3. Drop the Packet
+       4. Create Log"
+       read rule_ch
+       case $rule_ch in 
+        1) rule="ACCEPT" ;;
+        2) rule="REJECT" ;;
+        3) rule="DROP" ;;
+        4) rule="LOG" ;;
+       esac
+###################Generating the Rule####################
+echo -e "\n\tPress Enter key to Generate the Complete Rule!!!"
+read temp
+echo -e "The Generated Rule is \n"
+if [ $proto == "NULL" ]; then
+ echo -e "\niptables -A $chain -s $ip_source -d $ip_dest -j $rule\n"
+ gen=1
+else
+ echo -e "\niptables -A $chain -s $ip_source -d $ip_dest -p $proto -j $rule\n"
+ gen=2
+fi 
+echo -e "\n\tDo you want to Enter the Above rule to the IPTABLES? Yes=1 , No=2"
+read yesno
+if [ $yesno == 1 ] && [ $gen == 1 ]; then
+ iptables -A $chain -s $ip_source -d $ip_dest -j $rule
+else if [ $yesno == 1 ] && [ $gen == 2 ]; then
+ iptables -A $chain -s $ip_source -d $ip_dest -p $proto -j $rule         
+else if [ $yesno == 1 ] && [$gen == 2]; then
+ iptables -A $chain -s $(grep -hvE "^#|^$" $ip_source) -d $(grep -hvE "^#|^$" $ip_dest) -p $proto -j $rule         
+else if [ $yesno == 3 ]; then
+
+
+ main
+fi
+fi
+fi
+fi
+}
+      
+main()
+{
+ ROOT_UID=0
+ if [ $UID == $ROOT_UID ];
+ then
+ clear
+ opt_main=1
+ while [ $opt_main != 4 ]
+ do
+echo -e "/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\n" 
+#############Check Whether the iptables installed or not############ 
+ echo -e "\t*****Main Menu*****\n
+ 1. Check Iptables Package\n
+ 2. Iptables Services\n
+ 3. Build Your Firewall with Iptables\n
+ 4. Exit"
+ read opt_main
+ case $opt_main in
+  1) echo -e "******************************"
+    rpm -q iptables 
+     echo -e "******************************" ;;
+  2) checkstatus ;;
+  3) buildfirewall ;;
+  4) exit 0 ;;
+  *) echo -e "Wrong option Selected!!!"
+ esac
+done
+else
+ echo -e "You Must be the ROOT to Perfom this Task!!!"
+fi
+}
+main
+exit 0
\ No newline at end of file
diff --git a/scripts/loop_a_function.sh b/scripts/loop_a_function.sh
new file mode 100644
index 0000000..4317024
--- /dev/null
+++ b/scripts/loop_a_function.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+#loop a function
+
+FILE="../servers"
+
+uptime_ost ()
+{
+for host in $(cat ${FILE})
+do
+ssh -o ConnectTimeout=3 -n root@$host "uptime"  >> uptime_$host
+done
+}
+
+while true ;do
+        uptime_ost;
+       sleep 5
+done > /dev/null 2>&1
diff --git a/scripts/looping_within_host_ssh.sh b/scripts/looping_within_host_ssh.sh
new file mode 100644
index 0000000..9b85dd2
--- /dev/null
+++ b/scripts/looping_within_host_ssh.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+FILE=$1
+                for host in $(cat $FILE); do
+                        if [[ $host =~ clnara* || clnars1d && clnars1m && clnsr206 && clnprp1d && clnprp1m && clnpr2e4 ]] ; then
+                                echo -e " $host must be mounted as binformd user\n"
+                        else
+                                ssh $host 'for i in $(hostname && cat /etc/fstab |grep -v "^#" | grep sc |awk '\''{print $2}'\'' ) ; do echo $i; done' 2>&1 | tee -a celeraUmnt${DATE}
+                        fi
+                done
+
diff --git a/scripts/motd b/scripts/motd
new file mode 100644
index 0000000..037b7b9
--- /dev/null
+++ b/scripts/motd
@@ -0,0 +1,62 @@
+#/usr/local/bin/dynmotd 
+#!/bin/bash
+USER=$(whoami)
+HOSTNAME=$(uname -n)
+
+MEMORY1=$(free -t -h | grep "Mem" | awk '{print $3;}')
+MEMORY2=$(free -h | grep "Mem" | awk '{print $2;}')
+PSA=$(ps -Afl | wc -l)
+
+# time of day
+DATE=$(date +"%F %H:%M:%S")
+
+
+#System uptime
+uptime=$(cat /proc/uptime | cut -f1 -d.)
+upDays=$((uptime/60/60/24))
+upHours=$((uptime/60/60%24))
+upMins=$((uptime/60%60))
+upSecs=$((uptime%60))
+
+#System load
+LOAD1=`cat /proc/loadavg | awk {'print $1'}`
+LOAD5=`cat /proc/loadavg | awk {'print $2'}`
+LOAD15=`cat /proc/loadavg | awk {'print $3'}`
+
+#Host engine
+ENGINE=$(hosted-engine --vm-status|grep "Engine status")
+
+RUNNING_VMS=$(virsh -r list | awk '{print$2 " "$3}'|grep -v "Name State"|  column -t)
+
+#Some Colors
+BRED='\033[1;31m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+#has the server been rebooted indicator
+if [ $upDays -eq "0" ]; then
+		echo -e "${BRED}SERVER HAS BEEN REBOOTED $upHours hours AGO ${NC}";
+fi
+
+echo "
+- System uptime.......: $upDays days $upHours hours $upMins minutes $upSecs seconds
+- Current time........: $DATE
+- Current user........: $USER
+- Hostname............: $HOSTNAME
+- Release.............: `cat /etc/redhat-release`
+- Users...............: Currently `users | wc -w` user(s) logged on
+- CPU usage...........: $LOAD1, $LOAD5, $LOAD15 (1, 5, 15 min)
+- Memory used.........: $MEMORY1 of $MEMORY2
+- Swap in use.........: `free -m | tail -n 1 | awk '{print $3}'` MB
+- Processes...........: $PSA running
+- VM's on this HV.....: 
+$RUNNING_VMS
+
+- Host engine status..: 
+$ENGINE 
+
+==================================== volume status vm ===============================
+$(gluster volume status vm clients|grep 'Brick\|Clients')
+
+==================================== volume status engine ===========================
+$(gluster volume status engine clients|grep 'Brick\|Clients')
+"
diff --git a/scripts/mount_tool.sh b/scripts/mount_tool.sh
new file mode 100644
index 0000000..318c7c4
--- /dev/null
+++ b/scripts/mount_tool.sh
@@ -0,0 +1,181 @@
+#!/bin/bash
+#(c) Roy Cohen 29/03/2014    :roy@wondercohen.nl
+#objective                   :Mount and Umount mounts on remote server
+#last update                 :10/05/2014
+#version                     :0.3
+
+if [ $# -lt 1 ]
+then
+  echo "Syntax error must be : ./`basename $0` <file name>"
+  exit
+fi
+clear
+# Parameter
+DATE=`/bin/date +%H\u%M-%d-%b-%Y`
+FILE=$1
+# Variables
+LOGDIR="$HOME/celera/logs/"
+
+check(){
+        opt_checkstatus=1
+        while [ $opt_checkstatus != 6 ]
+        do
+                clear
+                echo -e "\n\t*****Checks for mount on servers*****\n
+                1. Check all mounts via mtab\n
+                2. Check Celera mounts via mtab\n
+                3. Check all mounts via fstab\n
+                4. Check Celera mounts via fstab\n
+                5. Check Noauto mounts in fstab\n
+                6. Go back to Main Menu"
+
+        read opt_checkstatus
+        case $opt_checkstatus in
+        1)
+                for host in $(cat $FILE); do
+                ssh $host 'for i in $(hostname && echo "**Mounts**" && cat /etc/mtab |grep -v "^#" |awk '\''{print $2}'\'' ) ; do echo $i; done' 2>&1 | tee -a ${LOGDIR}allMtab${DATE}
+                done
+        read temp;;
+
+        2)
+                for host in $(cat $FILE); do
+                ssh $host 'for i in $(hostname && echo "**Mounts**" && cat /etc/mtab |grep -v "^#" | grep sc |awk '\''{print $2}'\'' ) ; do echo $i; done' 2>&1 | tee -a ${LOGDIR}celeraMtab_${DATE}
+                done
+        read temp;;
+
+        3)
+                for host in $(cat $FILE); do
+                ssh $host 'for i in $(hostname && echo "**Mounts**" && cat /etc/fstab |grep -v "^#" |awk '\''{print $2}'\'' ) ; do echo $i; done' 2>&1 | tee -a ${LOGDIR}allFstab${DATE}
+                done
+        read temp;;
+
+        4)
+                for host in $(cat $FILE); do
+                ssh $host 'for i in $(hostname && echo "**Mounts**" && cat /etc/fstab |grep -v "^#" | grep sc |awk '\''{print $2}'\'' ) ; do echo $i; done' 2>&1 | tee -a ${LOGDIR}celeraFstab${DATE}
+                done
+        read temp;;
+        
+        5)
+                for host in $(cat $FILE); do
+                ssh $host 'for i in $(hostname && echo "**Mounts**" && cat /etc/fstab |grep -v "^#" | grep noauto | grep -v sys |awk '\''{print $2}'\'' ) ; do echo $i; done' 2>&1 | tee -a ${LOGDIR}allNoautoFstab${DATE}
+                done
+        read temp;;
+
+        6) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+
+}
+
+mount()
+{
+        opt_checkstatus=1
+        while [ $opt_checkstatus != 4 ]
+        do
+                clear
+                echo -e "\n\t***** Mount on servers *****\n
+                1. Mount all via fstab\n
+                2. Mount only Celera via fstab\n
+                3. Mount all noauto via fstab\n
+                4. Go back to Main Menu"
+
+        read opt_checkstatus
+        case $opt_checkstatus in
+        1)
+                for host in $(cat $FILE); do
+                        if [[ $host =~ clnara* || clnars1d && clnars1m && clnsr206 && clnprp1d && clnprp1m && clnpr2e4 ]] ; then
+                        echo -e " $host must be mounted as binformd user\n" | tee -a ${LOGDIR}binformd${DATE}
+                        else
+                                ssh $host mount -a 2>&1 | tee -a ${LOGDIR}mountAll${DATE}
+                        fi
+                done
+                read temp;;
+
+        2)
+                for host in $(cat $FILE); do
+                        if [[ $host =~ clnara* || clnars1d && clnars1m && clnsr206 && clnprp1d && clnprp1m && clnpr2e4 ]] ; then
+                                echo -e " $host must be mounted as binformd user\n"| tee -a ${LOGDIR}binformd${DATE}
+                        else
+                                ssh $host 'for i in $(hostname && echo "**Mounts that were mounted**" && cat /etc/fstab |grep -v "^#" | grep sc |awk '\''{print $2}'\'' ) ; do mount $i; done' 2>&1 | tee -a ${LOGDIR}celeraMnt${DATE}
+                        fi
+                done
+                read temp;;
+        
+        3)
+                for host in $(cat $FILE); do
+                        if [[ $host =~ clnara* || clnars1d && clnars1m && clnsr206 && clnprp1d && clnprp1m && clnpr2e4 ]] ; then
+                                echo -e " $host must be mounted as binformd user\n"| tee -a ${LOGDIR}binformd${DATE}
+                        else
+                                ssh $host 'for i in $(hostname && echo "**Mounts that were mounted**" && cat /etc/fstab |grep -v "^#" | grep noauto | grep -v sys |awk '\''{print $2}'\'' ) ; do mount $i; done' 2>&1 | tee -a ${LOGDIR}NoautoMnt${DATE}
+                        fi
+                done
+                read temp;;
+
+        4) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+
+}
+
+
+umount()
+{
+        opt_checkstatus=1
+        while [ $opt_checkstatus != 3 ]
+        do
+                clear
+                echo -e "\n\t***** UnMount on servers *****\n
+                1. UnMount all via fstab\n
+                2. UnMount only Celera via fstab\n
+                3. Go back to Main Menu"
+
+        read opt_checkstatus
+        case $opt_checkstatus in
+        1)
+                for host in $(cat $FILE); do
+                        echo "are you sure? if so change the script"
+                        #ssh $host umount -a 2>&1 | tee -a ${LOGDIR}umountAll${DATE}
+                done
+        read temp;;
+
+        2)
+                for host in $(cat $FILE); do
+                        ssh $host 'for i in $(hostname && echo "**Mounts that were unmounted**" && cat /etc/fstab | grep -v "^#" | grep sc |awk '\''{print $2}'\'' ) ; do umount $i; done' 2>&1 | tee -a ${LOGDIR}NoautoUmnt${DATE}
+                done
+        read temp;;
+
+        3) main;;
+   *) echo -e "Wrong Option Selected!!!"
+  esac
+ done
+
+}
+
+
+
+main()
+{
+ opt_main=1
+ while [ $opt_main != 4 ]
+ do
+echo -e "/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\n"
+#############Check Mounts  ############
+ echo -e "\t*****Main Menu*****\n
+ 1. Checks mounts\n
+ 2. Mount\n
+ 3. Umount\n
+ 4. Exit"
+ read opt_main
+ case $opt_main in
+  1) check ;;
+  2) mount ;;
+  3) umount ;;
+  4) exit 0 ;;
+  *) echo -e "Wrong option Selected!!!"
+ esac
+done
+}
+main
+exit 0
diff --git a/scripts/ping_test.sh b/scripts/ping_test.sh
new file mode 100644
index 0000000..b84917d
--- /dev/null
+++ b/scripts/ping_test.sh
@@ -0,0 +1,13 @@
+#!/bin/bash
+
+for host in $(cat $1)
+do
+
+	if  ping -c 1 -w 5 $host  &>/dev/null ; then 
+
+  	echo "$host is up"
+
+fi
+
+done
+
diff --git a/scripts/sc.sh b/scripts/sc.sh
new file mode 100644
index 0000000..614ea33
--- /dev/null
+++ b/scripts/sc.sh
@@ -0,0 +1,11 @@
+#tail -n 30 /u01/env/$1/tibco/tra/$1/application/logs/CARinboxBulk-Process_Archive.log |grep OutOfMemoryError |wc -l
+#!/bin/bash
+cd out/
+for h in $(ls /u01/zbx/agt/bin/OutOfMemory_log_checks/)
+do
+cd /u01/zbx/agt/bin/OutOfMemory_log_checks/
+mv $h.log.sh $h.sh
+#touch $h.sh
+#echo -e "#!/bin/bash\ntail -n 30 /u01/env/\$1/tibco/tra/\$1/application/logs/$h |grep OutOfMemoryError |wc -l" > $h.sh
+
+done
diff --git a/scripts/some_thouts.sh b/scripts/some_thouts.sh
new file mode 100644
index 0000000..8a9e096
--- /dev/null
+++ b/scripts/some_thouts.sh
@@ -0,0 +1,70 @@
+$opt_int	$proto_ch	$port_ch	
+if [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+1	1	1	-A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule_ch
+elif [ $opt_int == 1 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+1	2	1	-A $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule_ch
+elif [ $opt_int == 1 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+1	3	2	-A $chain -s $ip_source -i $interface --dport $port -j $rule_ch
+elif [ $opt_int == 1 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+1	1	2	-A $chain -s $ip_source -i $interface -p tcp --dport $port -j $rule_ch
+elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 1 ]; then
+2	1	1	-A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule_ch
+elif [ $opt_int == 2 ] && [ $proto_ch == 2 ] && [ $port_ch == 1 ]; then
+2	2	1	-A $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule_ch
+elif [ $opt_int == 2 ] && [ $proto_ch == 3 ] && [ $port_ch == 2 ]; then
+2	3	2	-A $chain -s $ip_source -d $ip_dest --dport $port -j $rule_ch
+elif [ $opt_int == 2 ] && [ $proto_ch == 1 ] && [ $port_ch == 2 ]; then
+2	1	2	-A $chain -s $ip_source -d $ip_dest -p tcp --dport $port -j $rule_ch
+fi
+
+			
+-A $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule_ch ($opt_int = 1 $proto_ch=2 $port_ch=2)
+-A $chain -s $ip_source -i $interface --dport 443 -j $rule_ch ($opt_int = 1 $proto_ch=3 NO PROTOC)	
+-A $chain -s $ip_source -d $ip_dest -p $proto --dport $port -j $rule_ch ($opt_int = 2 $proto_ch=2)
+-A $chain -s $ip_source -d $ip_dest --dport 443 -j $rule_ch ($opt_int = 2 $proto_ch=3 NO PROTOC)
+
+
+RULE="-A$chain$ipdetails$ip_dest$proto$port$rule"
+	for FILE in $(cat /etc/sysconfig/iptables |awk '{print $1$2$4$6$12$14}'|grep "^-")
+	do
+    if [ "$RULE" == "$FILE" ] ; then
+	echo "this Rule -D $chain -s $ip_source -i $interface -p $proto --dport $port -j $rule exsists"
+	read temp
+	
+	-A INPUT -s 11.11.11.11 -d 22.22.22.22 -p tcp -m tcp --dport 443 -j ACCEPT
+	-A INPUT -s 11.11.11.11 -d 22.22.22.22 -p tcp --dport 443 -j ACCEPT
+	
+	
+	awk '{print $1$2$3$4$5$6$7$8$9$10$11$12$13$14$15}'
+		for FILE in $(cat /etc/sysconfig/iptables |awk '{print $1$2$4$6$8$12$14}'|grep "^-")
+		do
+		RULE="-A$chain$ipdetails$interface$ip_dest$proto$port$rule"
+			if [ "$RULE" == "$FILE" ] ; then
+			echo -e "This Rule \"-D $chain -s $ip_source -i $interface -p $proto --dport $port\" -j $rule exsists"
+			echo -e "\nGo Back to Build Your Firewall program Or to Main Menu\n
+      1. Back to Build Your Firewall with Iptables
+      2. Go back to Main Menu"
+        read back_to
+           case $back_to in
+            1) buildfirewall;;
+            2) main;;
+            *) echo -e "Wrong option Selected!!!"
+           esac
+		   
+		   
+		   
+		   
+		  for duplicate_iptables in `(cat /etc/sysconfig/iptables | sort | uniq | grep "^-")`
+		  do
+		  echo "iptables $duplicate_iptables"
+		  done
+		  
+		  while read -r duplicate_iptables
+		  do 
+		  iptables $duplicate_iptables
+		  done < /etc/sysconfig/iptables | grep "^-"
+		  
+		  cat /etc/sysconfig/iptables | xargs -n1 -i{} grep '^{}$' ngfilelist.txt
+		  
+		  
+		  
\ No newline at end of file
diff --git a/scripts/ssh_loop.sh b/scripts/ssh_loop.sh
new file mode 100644
index 0000000..bc174b3
--- /dev/null
+++ b/scripts/ssh_loop.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+
+FILE=$1
+
+if [ $# -lt 1 ]
+then
+	echo "Syntax: ./$(basename $0) <file name>"
+  exit
+fi
+
+for host in $(cat ${FILE})
+do
+
+#scp bashrc root@$host:/etc/
+
+#echo $IP
+
+
+#ssh -n admroy@$host "rm -rf /tmp/atlas/ && sh /root/atlas.sh init && /tmp/atlas/atlas.sh build && /tmp/atlas/atlas.sh purge && /tmp/atlas/atlas.sh install && hostname"
+ssh -n root@$host "hostname"
+#ssh -n root@$host "hostname"
+
+#add to known hosts
+#ssh-keyscan -H $host >> ~/.ssh/known_hosts	
+
+done
+
+#IPADDR="10.2.2."
diff --git a/scripts/test_con_server_status.sh b/scripts/test_con_server_status.sh
new file mode 100644
index 0000000..526d59b
--- /dev/null
+++ b/scripts/test_con_server_status.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+#Roy Cohen
+# Test server conection to GW and whire the date and upteme to a logfile
+
+status=$(ps -ef | grep test_con_server_status.sh | grep -v grep |wc -l)
+if [ "$status" -ge 3 ] ;
+        then
+                exit
+        else
+                while true
+                do
+                        nc -z 10.2.1.1 22 && echo $(date && uptime) >> /var/log/custom/$HOSTNAME
+                        sleep 5
+                done
+fi
diff --git a/scripts/test_scripts/gluster_peer_check.sh b/scripts/test_scripts/gluster_peer_check.sh
new file mode 100644
index 0000000..6a1ba93
--- /dev/null
+++ b/scripts/test_scripts/gluster_peer_check.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+HOST=$1
+TIME=$(date)
+while echo -e "\n**$TIME**" >> gluster_peer_$HOST ;do
+	ssh -o ConnectTimeout=3 -n root@$HOST "gluster peer status" 
+	sleep 5;
+done >> gluster_peer_$HOST.log 2>&1 
diff --git a/scripts/test_scripts/log_oc_nodes.sh b/scripts/test_scripts/log_oc_nodes.sh
new file mode 100644
index 0000000..170f441
--- /dev/null
+++ b/scripts/test_scripts/log_oc_nodes.sh
@@ -0,0 +1,6 @@
+for (( ; ; ))
+do
+  date >> oc_node_status.log
+  oc get nodes -o wide >> oc_node_status.log
+  sleep 2
+done
diff --git a/scripts/test_scripts/log_oc_pods.sh b/scripts/test_scripts/log_oc_pods.sh
new file mode 100644
index 0000000..3f0c015
--- /dev/null
+++ b/scripts/test_scripts/log_oc_pods.sh
@@ -0,0 +1,6 @@
+for (( ; ; ))
+do
+  date >> oc_pod_status.log
+  oc get pods --all-namespaces -o wide >> oc_pod_status.log
+  sleep 10
+done
diff --git a/scripts/test_scripts/log_ping_between.sh b/scripts/test_scripts/log_ping_between.sh
new file mode 100644
index 0000000..2f302b3
--- /dev/null
+++ b/scripts/test_scripts/log_ping_between.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+FROM_SERVER=$1
+TO_SERVER=$2
+LOG_FILE="ping_${FROM_SERVER}_to_${TO_SERVER}.log"
+
+for (( ; ; ))
+do
+  date >> $LOG_FILE
+  ssh -o ConnectTimeout=1 -o ConnectionAttempts=1 \
+    ${FROM_SERVER} ping ${TO_SERVER} | awk '{ print strftime("%Y-%m-%d %H:%M:%S"), $0; fflush(); }' >> $LOG_FILE
+  echo "Disconnected from server..." >> $LOG_FILE
+  sleep 10
+done
diff --git a/scripts/test_scripts/ping_test.sh b/scripts/test_scripts/ping_test.sh
new file mode 100644
index 0000000..971bf28
--- /dev/null
+++ b/scripts/test_scripts/ping_test.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+HOSTS=(host1
+host2
+)
+
+uptime_mv ()
+{
+for host in "${HOSTS[@]}" ;
+do
+	PONG=$(ping -c 1 $host)
+echo "$(date) $PONG" >> ping_$host.log &
+done
+}
+
+while true ;do 
+	uptime_mv ;
+       sleep 1	
+done 
diff --git a/scripts/test_scripts/test_all.sh b/scripts/test_scripts/test_all.sh
new file mode 100644
index 0000000..4388458
--- /dev/null
+++ b/scripts/test_scripts/test_all.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+
+function cleanup {
+  # Your cleanup code here
+  echo "My pid is: $$ ?"
+  echo "Pids to kill: $(pgrep -P $$)"
+  pkill -P $$
+}
+trap cleanup EXIT
+
+# Now the real work:
+
+# Things to measure:
+# - availability of loadbalancer (log_haproxy.sh)
+# - availability of webconsole and master APIs (log_master_api.sh)
+# - state of nodes (log_oc_nodes.sh)
+# - state of pods (log_oc_pods.sh)
+# - availability of servers
+# - pings between servers (log_ping_between.sh)
+
+mkdir $1
+cd $1
+
+#../log_haproxy.sh &
+#../log_master_api.sh &
+#../log_oc_nodes.sh &
+#../log_oc_pods.sh &
+../uptime_hv.sh &
+../virsh_list_hv.sh &
+../uptime_vm.sh &
+../gluster_peer_check.sh<Hostname> &
+wait
+
diff --git a/scripts/test_scripts/uptime_hv.sh b/scripts/test_scripts/uptime_hv.sh
new file mode 100644
index 0000000..c343795
--- /dev/null
+++ b/scripts/test_scripts/uptime_hv.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+
+HOSTS=(
+
+)
+
+uptime_ost ()
+{
+for host in "${HOSTS[@]}" ;
+do
+ssh -o ConnectTimeout=3 -o ConnectionAttempts=1 -n root@$host "uptime"  >> uptime_$host.log
+done
+}
+
+while true ;do 
+	uptime_ost;
+       sleep 5	
+done > /dev/null 2>&1
diff --git a/scripts/test_scripts/uptime_vm.sh b/scripts/test_scripts/uptime_vm.sh
new file mode 100644
index 0000000..a38a92f
--- /dev/null
+++ b/scripts/test_scripts/uptime_vm.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+HOSTS=(host1
+host2
+)
+
+uptime_mv ()
+{
+for host in "${HOSTS[@]}" ;
+do
+ssh -o ConnectTimeout=3 -o ConnectionAttempts=1 -n root@$host "uptime"  >> uptime_$host.log
+done
+}
+
+while true ;do 
+	uptime_mv ;
+       sleep 5	
+done > /dev/null 2>&1
diff --git a/scripts/test_scripts/virsh_list_hv.sh b/scripts/test_scripts/virsh_list_hv.sh
new file mode 100644
index 0000000..a0be82f
--- /dev/null
+++ b/scripts/test_scripts/virsh_list_hv.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+HOSTS=(
+host1
+host2
+)
+
+virsh_test ()
+{
+for host in "${HOSTS[@]}" ;
+do
+echo $(date) >> virsh_$host
+ssh -o ConnectTimeout=3 -o ConnectionAttempts=1 -n root@$host "virsh -r list"  >> virsh_$host.log
+done
+}
+
+while true ;do 
+	virsh_test;
+       sleep 5	
+done > /dev/null 2>&1
diff --git a/scripts/tools/OS_patching_tool.sh b/scripts/tools/OS_patching_tool.sh
new file mode 100644
index 0000000..5589bcf
--- /dev/null
+++ b/scripts/tools/OS_patching_tool.sh
@@ -0,0 +1,194 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@proteon.com
+#Proteon B.V.                                   :Zuid Hollandlaan 7, 2596 AL Den Haag
+#objective                                      :OpenShift pathing tool using yum (RHEL and Centos)
+#First line of code                             :04/09/2019
+#last update                                    :06/09/2019
+#version                                        :0.1
+#inspred by  /home/freark/bin/batch_upgrade.sh
+
+
+#Check if root is running the script
+if [[ $EUID -ne 0 ]]; then
+   echo "This script must be run as root" 
+   exit 1
+fi
+
+# Parameters
+NAGIOS_SCRIPT='/opt/proteon-scripts/minions/nagios/generic/nagios_add_downtime_host.sh'
+BASE_LOG_DIR=/var/log/batch_upgrade
+TIMESTAMP=$(date +%Y%m%d.%H%M)
+
+#set the master host
+read -p "Enter OpenShift master: " OS_MASTER
+
+#Set node varible
+OS_NODES_READY=$(ssh -n $OS_MASTER "oc get nodes" |grep "Ready" | cut -d " " -f1)
+COUNT_OF_OS_NODES_DRAINED=$(ssh -n $OS_MASTER "oc get nodes" |egrep "NotReady|SchedulingDisabled" |wc -l)
+#TODO what if there are more that one node already driand?
+if [[ "$COUNT_OF_OS_NODES_DRAINED" -gt 0 ]] ; then
+  echo -e "n\ NOTE: There are driand nodes on the cluster\n
+    Please chack the master node for possible issues"
+    exit 1
+fi
+
+###############################OPENSHIFT PACHING BEGINS HERE###############################
+#list nodes on the OpenShift Master
+function list_nodes()
+{
+  printf '%s\n' "${OS_NODES_READY[@]}"
+  set_update_host
+}
+
+#set the hostname for the update
+function set_update_host()
+{
+echo "Set the OpenShift node that needs to updated or Press ^c to bailout/finish"
+read -p "Enter OpenShift node: " HOST_TO_UPDATE
+}
+
+#Breack in an error
+function pause_on_error {
+    if [ $1 -ne 0 ]
+    then
+        echo -e "\e[31mThe last command resulted in an error.\e[0m Press ^c to bailout or enter to continue"
+        read
+    fi
+}
+
+#Add nagios downtime
+function nagios_downtime()
+{
+  $NAGIOS_SCRIPT --host=$HOST_TO_UPDATE --comment='Batch Updating Host'
+  echo "Adding downtime for host $HOST_TO_UPDATE..."
+  pause_on_error $?
+}
+
+#just a counter, one minute
+function time_counter()
+{
+count=0
+total=120
+
+  while [ $count -lt $total ]; do
+    sleep 0.5 # this is work
+    count=$(( $count + 1 ))
+    pd=$(( $count * 60 / $total ))
+    printf "\r${pd}s" $(( $count * 60 / $total ))
+  done
+}
+
+#Drain the node
+function drain()
+{
+  echo "Draining $HOST_TO_UPDATE"
+  ssh -n $OS_MASTER "oc adm drain --ignore-daemonsets $HOST_TO_UPDATE"
+  echo "
+ ________________________________________________________________________
+< This will take a minute, Just making sure that the node is fully drained >
+ ------------------------------------------------------------------------
+        \   ^__^
+         \  (oo)\_______
+            (__)\       )\/
+                ||----w |
+                ||     ||
+
+  "
+  time_counter
+  pause_on_error $?
+}
+
+#Update node
+function update()
+{
+  mkdir -p ${BASE_LOG_DIR}
+  LOG_DIR=$(mktemp -d ${BASE_LOG_DIR}/${TIMESTAMP}.XXXX)
+
+  echo -e "n\I'm now going to update $HOST_TO_UPDATE."
+  echo "You can follow/check logs in:"
+  echo ${LOG_DIR}
+  echo "Use for instance 'tail -f ${LOG_DIR}/$HOST_TO_UPDATE' in a different terminal after continuing here."
+  echo "If any fail you MUST check and update these before proceeding!"
+  echo -e "\e[33mPress ^c to bailout or enter to continue\e[0m"
+  read
+  echo "This may take some time..."
+  echo "Please check the packge list, if docker/openshift/atomic are incluted than, STOP the update by reapling N to yum or Press ^c  "
+  
+  #exclude openshift and docker
+  ssh -n $HOST_TO_UPDATE "cat /etc/yum.conf | grep -v exclude >/tmp/yum.conf && echo "exclude= docker* atomic* " >> /tmp/yum.conf && cat /tmp/yum.conf >/etc/yum.conf"
+  #update command
+  ssh -t $HOST_TO_UPDATE "sleep 10 && yum update --security" | tee ${LOG_DIR}/$HOST_TO_UPDATE
+  pause_on_error $?
+}
+
+#reboot node
+function reboot_server()
+{
+LOG_DIR=$(mktemp -d ${BASE_LOG_DIR}/${TIMESTAMP}.XXXX)
+    
+
+  echo "Restarting server $HOST_TO_UPDATE"
+  #ANSWER='dummyvalue'
+  while [[ -n "${ANSWER}" || ( "${ANSWER}" != 'c' && "${ANSWER}" != 's' ) ]]; do
+    echo -e "\e[33mPress 'c' continue, 's' to skip, or ^c to bail out...\e[0m"
+      read ANSWER
+        if [[ "${ANSWER}" == 's' ]]; then
+            echo "Skipping $HOST_TO_UPDATE"
+            return 0
+        fi
+        if [[ "${ANSWER}" == 'c' ]]; then
+            echo "Proceeding to reboot $HOST_TO_UPDATE"
+            break
+        fi
+  done
+   
+    timeout 4 ssh -o ConnectTimeout=3 $HOST_TO_UPDATE "reboot"
+    # no pause on reboot, because often you get kicked out of the server too quickly causing an non-zero exitcode
+    # pause_on_error $?
+
+    # wait until the server is down
+    ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+    rc=$?
+    while [[ $rc == 0 ]]
+    do
+        echo "Waiting for $HOST_TO_UPDATE to be down..."
+        ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+        rc=$?
+        sleep 0.5
+    done
+
+    echo "Server $HOST_TO_UPDATE appears to be down..."
+
+    # wait until...
+    # server pings again
+
+    ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+    rc=$?
+    while [[ $rc != 0 ]]
+    do
+      echo "Waiting for $HOST_TO_UPDATE to be back up..."
+      ssh -o ConnectTimeout=2 $HOST_TO_UPDATE true
+      rc=$?
+      sleep 5
+    done
+}
+
+#uncordon node in the OpenShift master
+function uncordon()
+{
+  echo "------------------------------------"
+  echo "Reactivating $HOST_TO_UPDATE in the OpenShift master $OS_MASTER"
+  ssh -n $OS_MASTER "oc adm uncordon $HOST_TO_UPDATE"
+  list_nodes
+  pause_on_error $?
+}
+
+
+############################### -MAIN RUN- ###############################
+
+list_nodes
+nagios_downtime
+drain
+update
+reboot_server
+uncordon
diff --git a/scripts/tools/collect_info.sh b/scripts/tools/collect_info.sh
new file mode 100644
index 0000000..8f456e4
--- /dev/null
+++ b/scripts/tools/collect_info.sh
@@ -0,0 +1,13 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@proteon.com
+#Proteon B.V.                                   :Zuid Hollandlaan 7, 2596 AL Den Haag
+#objective                                      :colection script for run_collect_info.sh this script collects the Total Processors, Memory RAM Total Disk size per host.
+#First line of code                             :09/10/2019
+#last update                                    :11/10/2019
+#version                                        :0.1
+#synatx example of hostfile                     :<hostname,contract code> contract code must be in uppercase and my contain numbers 
+    echo -e "\tMemory(RAM) Info\t"`free -mt| awk '/Mem/{print " \tTotal, " $2 }'`
+    echo -e "\t,Total Processor,\t"`grep -c 'processor' /proc/cpuinfo`
+    TOTAL_HDD_SIZE=$(df  |grep "^/dev" |awk '{print $2}'|paste -sd+)
+    SUM_HDD=$(echo $(($TOTAL_HDD_SIZE)) | awk '{ byte =$1 /1024**2 ; print byte}')
+    echo -e "\t,Disks size,\t "$(echo $SUM_HDD)
\ No newline at end of file
diff --git a/scripts/tools/drain_host.sh b/scripts/tools/drain_host.sh
new file mode 100644
index 0000000..ae7d744
--- /dev/null
+++ b/scripts/tools/drain_host.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+OS_MASTER=$1
+HOSTS=($(cat $2))
+
+if [ $# -lt 1 ]
+then
+    echo "Syntax: ./$(basename $0)<OpenShift master node> <file name>"
+  exit
+fi
+
+for host in "${HOSTS[@]}"
+do
+   ssh -n root@$1 "oc adm drain --ignore-daemonsets $host"
+done
diff --git a/scripts/tools/just_a_waiting_bar.sh b/scripts/tools/just_a_waiting_bar.sh
new file mode 100644
index 0000000..1314439
--- /dev/null
+++ b/scripts/tools/just_a_waiting_bar.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+HOST_TO_UPDATE=Host1
+OS_MASTER=Master1
+
+function time_counter()
+{
+count=0
+total=120
+
+  while [ $count -lt $total ]; do
+    sleep 0.5 # this is work
+    count=$(( $count + 1 ))
+    pd=$(( $count * 60 / $total ))
+    printf "\r${pd}s" $(( $count * 60 / $total ))
+  done
+}
+
+
+  echo "Draining $HOST_TO_UPDATE"
+  echo "ssh -n $OS_MASTER "oc adm drain --ignore-daemonsets $HOST_TO_UPDATE""
+  echo "
+ ________________________________________________________________________
+< This will take a minute, Just making sure that the node is fully drained >
+ ------------------------------------------------------------------------
+        \   ^__^
+         \  (oo)\_______
+            (__)\       )\/\/
+                ||----w |
+                ||     ||
+
+  "
+  time_counter 
\ No newline at end of file
diff --git a/scripts/tools/run_collect_info_v2.sh b/scripts/tools/run_collect_info_v2.sh
new file mode 100644
index 0000000..22f33c3
--- /dev/null
+++ b/scripts/tools/run_collect_info_v2.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+#Roy Cohen                                      :roy@proteon.com
+#Proteon B.V.                                   :Zuid Hollandlaan 7, 2596 AL Den Haag
+#objective                                      :Script that scp's collect_info.sh from a host source file, and collects and sums-up Total Processors, Memory RAM Total Disk size contact code files.
+#First line of code                             :09/10/2019
+#last update                                    :11/10/2019
+#version                                        :0.1
+#synatx example of hostfile                     :<hostname,contract code> contract code must be in uppercase and my contain numbers 
+
+if [ $# -lt 1 ]
+then
+    echo "Syntax: ./$(basename $0) <file name with hosts and contract codes>"
+  exit
+fi
+CHECK_CONTACT_CODES=$(cat $1 |cut -d "," -f2| grep -oP '[a-z]'|wc -l)
+
+if [[ $CHECK_CONTACT_CODES -gt 0 ]]
+    then
+        echo "there is some issue with the contact code in the hostfile, please make sure that all contact cods are in uppercase"
+
+else
+#clean the results directory
+rm /opt/scripts/tools/collect_info/results/*
+
+#collect data from remote server 
+    for host in $(cat $1)
+        do
+            HOST=$(echo $host|cut -d "," -f1)
+            CONTRACT_LIST=$(echo $host|cut -d "," -f2)
+            scp -q -p collect_info.sh $HOST:/root
+            SSH_OUT=$(ssh -n $HOST "/root/collect_info.sh")
+            printf "%s " "$HOST," >> results/$CONTRACT_LIST
+            echo $SSH_OUT >> results/$CONTRACT_LIST
+    done 2>/opt/scripts/tools/collect_info/results/error.log
+
+
+# sums-up the colleced data in to contact code files 
+for contr_file in $(ls /opt/scripts/tools/collect_info/results/)
+    do    
+        RAM=$(cat results/$contr_file|cut -d "," -f3| paste -sd+ | bc )
+        CPU=$(cat results/$contr_file|cut -d "," -f5| paste -sd+ | bc )
+        HDD=$(cat results/$contr_file|cut -d "," -f7| paste -sd+ | bc )
+        echo "Total Processors, $CPU" > /opt/scripts/tools/collect_info/results/$contr_file
+        echo "Memory RAM Total in MB, $RAM" >> /opt/scripts/tools/collect_info/results/$contr_file
+        echo "Disk size in GB, $HDD" >> /opt/scripts/tools/collect_info/results/$contr_file
+done
+fi 
+
+#cat all the contracts
+for contr in $(ls /opt/scripts/tools/collect_info/results/)
+    do 
+        echo "----$contr---"
+        cat /opt/scripts/tools/collect_info/results/$contr
+     done
diff --git a/scripts/tools/uncordon_host.sh b/scripts/tools/uncordon_host.sh
new file mode 100644
index 0000000..46663dd
--- /dev/null
+++ b/scripts/tools/uncordon_host.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+OS_MASTER=$1
+HOSTS=($(cat $2))
+
+if [ $# -lt 1 ]
+then
+    echo "Syntax: ./$(basename $0)<OpenShift master node> <file name>"
+  exit
+fi
+
+for host in "${HOSTS[@]}"
+do
+    ssh -n root@$1 "oc adm uncordon $host"
+done
diff --git a/scripts/uptime_loop.sh b/scripts/uptime_loop.sh
new file mode 100644
index 0000000..ab96254
--- /dev/null
+++ b/scripts/uptime_loop.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+FILE=$1
+
+if [ $# -lt 1 ]
+then
+	echo "Syntax: ./$(basename $0) <file name>"
+  exit
+fi
+
+for host in $(cat ${FILE})
+do
+
+ssh -n root@$host "hostname && uptime && virsh -r list"
+
+done
diff --git a/shell.sh b/shell.sh
new file mode 100644
index 0000000..9d27f19
--- /dev/null
+++ b/shell.sh
@@ -0,0 +1,94 @@
+#!/usr/bin/env bash
+
+# Wonder Cohen - The Hague The Netherlands
+# shell_history_audit.sh – put in /etc/profile.d
+# Logs every interactive-bash command (including within sudo) to /var/log/history
+# Author: Roy Cohen <roy@wondercohen.nl>   Last-update: 2025-06-23
+
+###  Installation notes:
+## Create the script
+# /etc/profile.d/shell_history_audit.sh
+
+## Create log directory and group
+# sudo groupadd -f historylog
+# sudo mkdir -p /var/log/history
+# sudo chown root:historylog /var/log/history
+# sudo chmod 1770 /var/log/history
+
+## Create the error log
+# sudo touch /var/log/history_audit_errors.log
+# sudo chown root:historylog /var/log/history_audit_errors.log
+# sudo chmod 666 /var/log/history_audit_errors.log
+
+## Secure script
+# sudo chmod 644 /etc/profile.d/shell_history_audit.sh
+# sudo chown root:root /etc/profile.d/shell_history_audit.sh
+
+## Make log files append-only (optional)
+# sudo find /var/log/history -type f -exec chattr +a {} \;
+#
+## Sudo environment setting
+# visudo
+# Defaults env_keep += "HISTFILE HISTTIMEFORMAT"
+#
+
+##############################################################################
+# Config – change these once
+HISTDIR="/var/log/history"
+AUDITGROUP="historylog"       # group allowed to read the logs
+LOG_MODE=0640                 #  -rw-r-----  root:historylog
+DIR_MODE=1770                 #  drwxrwx--T  root:historylog
+AUTO_LOGOUT=3600               # seconds
+ERRLOG="/var/log/history_audit_errors.log"
+
+##############################################################################
+# Skip for non-interactive shells
+[[ $- != *i* ]] && return
+
+##############################################################################
+# Auto-logout
+readonly TMOUT="$AUTO_LOGOUT"
+export   TMOUT
+
+##############################################################################
+# Determine source user (for sudo tracking)
+if [[ -n "${SUDO_USER:-}" && $SUDO_USER != "$USER" ]]; then
+    SRC="$SUDO_USER"
+else
+    SRC=$(logname 2>/dev/null || echo "$USER")
+fi
+
+LOGFILE="$HISTDIR/${USER}_${SRC}.log"
+
+##############################################################################
+# Create logfile if directory is writable and it doesn't exist
+if [[ -w "$HISTDIR" && ! -e "$LOGFILE" ]]; then
+    touch "$LOGFILE"                   # we have permission
+    chmod "$LOG_MODE"   "$LOGFILE" 2>/dev/null || true
+    chown "$USER:$AUDITGROUP" "$LOGFILE" 2>/dev/null || true
+fi
+##############################################################################
+# Check group membership (user must be in $AUDITGROUP)
+if ! id -nG "$USER" | grep -qw "$AUDITGROUP"; then
+    logger -t shell_history_audit "DENIED: $USER is not in $AUDITGROUP group. History logging skipped."
+    return 0
+fi
+##############################################################################
+# Activate history logging only when logfile exists & is writable
+if [[ -w "$LOGFILE" ]]; then
+    export HISTFILE="$LOGFILE"
+    export HISTSIZE=
+    export HISTFILESIZE=
+    export HISTIGNORE=''
+    export HISTCONTROL='ignoreboth'
+    export HISTTIMEFORMAT='%F %T '
+
+    shopt -s histappend
+    case "${PROMPT_COMMAND:-}" in
+        *history\ -a*) : ;;
+        *) PROMPT_COMMAND="history -a${PROMPT_COMMAND:+; $PROMPT_COMMAND}" ;;
+    esac
+else
+    # Log error (optional)
+    echo "$(date '+%F %T') WARN: Could not activate logging for $USER to $LOGFILE" >> "$ERRLOG" 2>/dev/null || true
+fi
\ No newline at end of file
diff --git a/shell_history_audit.sh b/shell_history_audit.sh
new file mode 100644
index 0000000..8ff6de8
--- /dev/null
+++ b/shell_history_audit.sh
@@ -0,0 +1,110 @@
+#!/usr/bin/env bash
+
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright © 2025 Roy Cohen <roy@wondercohen.nl>
+
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the “Software”), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED
+
+# Wonder Cohen - The Hague The Netherlands
+# shell_history_audit.sh – put in /etc/profile.d
+# Logs every interactive-bash command (including within sudo) to /var/log/history
+# Last-update: 2025-06-23
+
+###  Installation notes:
+## Create the script
+# /etc/profile.d/shell_history_audit.sh
+
+## Create log directory and group
+# sudo groupadd -f historylog
+# sudo mkdir -p /var/log/history
+# sudo chown root:historylog /var/log/history
+# sudo chmod 1770 /var/log/history
+
+## Create the error log
+# sudo touch /var/log/history_audit_errors.log
+# sudo chown root:historylog /var/log/history_audit_errors.log
+# sudo chmod 666 /var/log/history_audit_errors.log
+
+## Secure script
+# sudo chmod 644 /etc/profile.d/shell_history_audit.sh
+# sudo chown root:root /etc/profile.d/shell_history_audit.sh
+
+## Make log files append-only (optional)
+# sudo find /var/log/history -type f -exec chattr +a {} \;
+#
+## Sudo environment setting
+# visudo
+# Defaults env_keep += "HISTFILE HISTTIMEFORMAT"
+#
+
+##############################################################################
+# Config – change these once
+HISTDIR="/var/log/history"
+AUDITGROUP="historylog"       # group allowed to read the logs
+LOG_MODE=0640                 #  -rw-r-----  root:historylog
+DIR_MODE=1770                 #  drwxrwx--T  root:historylog
+AUTO_LOGOUT=3600               # seconds
+ERRLOG="/var/log/history_audit_errors.log"
+
+##############################################################################
+# Skip for non-interactive shells
+[[ $- != *i* ]] && return
+
+##############################################################################
+# Auto-logout
+readonly TMOUT="$AUTO_LOGOUT"
+export   TMOUT
+
+##############################################################################
+# Determine source user (for sudo tracking)
+if [[ -n "${SUDO_USER:-}" && $SUDO_USER != "$USER" ]]; then
+    SRC="$SUDO_USER"
+else
+    SRC=$(logname 2>/dev/null || echo "$USER")
+fi
+
+LOGFILE="$HISTDIR/${USER}_${SRC}.log"
+
+##############################################################################
+# Create logfile if directory is writable and it doesn't exist
+if [[ -w "$HISTDIR" && ! -e "$LOGFILE" ]]; then
+    touch "$LOGFILE"                   # we have permission
+    chmod "$LOG_MODE"   "$LOGFILE" 2>/dev/null || true
+    chown "$USER:$AUDITGROUP" "$LOGFILE" 2>/dev/null || true
+fi
+##############################################################################
+# Check group membership (user must be in $AUDITGROUP)
+if ! id -nG "$USER" | grep -qw "$AUDITGROUP"; then
+    logger -t shell_history_audit "DENIED: $USER is not in $AUDITGROUP group. History logging skipped."
+    return 0
+fi
+##############################################################################
+# Activate history logging only when logfile exists & is writable
+if [[ -w "$LOGFILE" ]]; then
+    export HISTFILE="$LOGFILE"
+    export HISTSIZE=
+    export HISTFILESIZE=
+    export HISTIGNORE=''
+    export HISTCONTROL='ignoreboth'
+    export HISTTIMEFORMAT='%F %T '
+
+    shopt -s histappend
+    case "${PROMPT_COMMAND:-}" in
+        *history\ -a*) : ;;
+        *) PROMPT_COMMAND="history -a${PROMPT_COMMAND:+; $PROMPT_COMMAND}" ;;
+    esac
+else
+    # Log error (optional)
+    echo "$(date '+%F %T') WARN: Could not activate logging for $USER to $LOGFILE" >> "$ERRLOG" 2>/dev/null || true
+fi
\ No newline at end of file
diff --git a/ssh_loops/loop_array.sh b/ssh_loops/loop_array.sh
new file mode 100644
index 0000000..e53e41f
--- /dev/null
+++ b/ssh_loops/loop_array.sh
@@ -0,0 +1,13 @@
+#!/bin/bash
+#find only derctoris older then 10 days 
+DIR_NAME=($(find /opt/backup/database/  -maxdepth 1 -type d -ctime +10))
+
+for dir in "${DIR_NAME[@]}"
+do
+    echo "tar -cvPf $dir.tgz $dir --remove-files"
+
+done
+
+
+#this will tar and remove 
+ #tar -cvf /home/roy/Desktop/test/some_dir.tgz /home/roy/Desktop/test/some_dir --remove-files
\ No newline at end of file
diff --git a/ssh_loops/loop_array_with_flags.sh b/ssh_loops/loop_array_with_flags.sh
new file mode 100644
index 0000000..3f0a8d5
--- /dev/null
+++ b/ssh_loops/loop_array_with_flags.sh
@@ -0,0 +1,51 @@
+#!/bin/bash
+#find only directories older then 10 days
+
+#this will tar and remove 
+ #tar -cvf /home/roy/Desktop/test/some_dir.tgz /home/roy/Desktop/test/some_dir --remove-files
+
+ while test $# -gt 0; do
+  case "$1" in
+    -h|--help)
+      echo "$package - attempt to capture frames"
+      echo " "
+      echo "$package [options] application [arguments]"
+      echo " "
+      echo "options:"
+      echo "-h, --help                show brief help"
+      echo "--days=<1-n>              specify an action to use"
+      echo "-o, --output-dir=DIR      specify a directory to store output in"
+      exit 0
+      ;;
+    -a)
+      shift
+      DIR_NAME=($(find /var/log  -maxdepth 1 -type d -mtime +10))
+      if test $# -gt 0; then
+        export PROCESS=$1
+      else
+        for dir in "${DIR_NAME[@]}"
+	    do
+    		echo "tar -czPf $dir.tar.gz $dir --remove-files"
+		done
+        exit 1
+      fi
+      shift
+      ;;
+    --days*)
+      DIR_NAME=($(find /var/log/  -maxdepth 1 -type d -mtime +$2))
+       if test $# -gt 0; then
+        export PROCESS=$1
+      else
+        for dir in "${DIR_NAME[@]}"
+	    do
+    		echo "tar -czPf $dir.tar.gz $dir --remove-files"
+		done
+        exit 1
+        
+      shift
+      ;;
+    *)
+      break
+      ;;
+  esac
+done
\ No newline at end of file
diff --git a/ssh_loops/service_check_loop.sh b/ssh_loops/service_check_loop.sh
new file mode 100644
index 0000000..1cc74ce
--- /dev/null
+++ b/ssh_loops/service_check_loop.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+# This script will check the runing services for every host you provide in a source file.
+# Example of running  ./service_check_loop.sh <some_file_with_hosts>
+
+HOSTNAME=($(cat $1))
+
+if [ $# -lt 1 ]
+then
+    echo "Syntax: ./$(basename $0) <file name>"
+  exit
+fi
+
+for host in "${HOSTNAME[@]}"
+do
+printf "%s " "$host,"
+SSH_OUT=$(ssh -n root@$host "netstat -pnltu|cut -d "/" -f2|sed '/^$/d'|sort|uniq"|tr '\n' ',')
+echo $SSH_OUT
+done |tee -a /tmp/$1.log